Canon imagePROGRAF iPF6350 Guía básica descargar pdf (Pagina 37)

Replacing the Printhead

Prepare a new Ink Tank when ink levels are low.•

When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The metal parts

of the Printhead become hot during printing, and there is a risk of burns from touching these parts.

•

Your hands may become dirty during Printhead replacement. Use the gloves provided with the new Printhead for

replacement.

•

If the Tab Selection screen is not displayed, press the Menu button.•

If the roll is not ejected because of the cutting method

selected, cut it manually and remove it.

(→"Cutting Roll Paper After Printing," User Manual)

Clean inside the Top Cover . (→

, If Paper is Soiled)

Access the menu for printhead replacement

On the Tab Selection screen of the Control Panel , press

◄ or ► to select the Settings/Adj. tab (

Press the OK button.

Press ▲ or ▼ to select Maintenance , and then press the

OK button.

Press ▲ or ▼ to select Replace P.head , and then press

the OK button.

The Set./Adj. Menu is displayed.

Press ▲ or ▼ to select the Printhead for replacement.

Select Printhead L when replacing the left printhead and

Printhead R when replacing the right printhead. Make

sure your selection is correct.

Press the OK button.

Ink is now ﬁ lled.

After about three minutes, a message is shown on the

Display Screen instructing you to open the Top Cover .

㪏㪇㩼

Remaining Amount

Maint. cart.

Ready

OK:Setting/Adj. Menu

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Sin comentarios

Canon imagePROGRAF iPF6350 Guía básica Pagina 37