Canon MX720 Series Guia de preparacion

PIXMA MX720Setup Guide© CANON INC. 2012series

Disable7. When the left screen appears, press the OK button.8. When the screen shown on the right appears, press the COPY button (A).The network con

WEP7. Select the WEP key number you want to use.8. Press the OK button.9. Enter the WEP key.Character entry is case-sensitive.10. Press the OK butt

WPA/WPA27. Enter the passphrase.Character entry is case-sensitive.8. Press the OK button.9. Make sure that the passphrase is correct.10. Press the

Wired Connectiona Preparation for ConnectionBefore Starting Wired Connection Setup1. Make sure that the printer is turned on.If the power is on, a b

2. Connect the printer and a network device (router, etc.) with an Ethernet cable (A).Do not connect it to the USB port.c Printer Setup1. Press the

8. Select Change wireless/wired.9. Press the OK button.10. Select Wired LAN active.11. Press the OK button.12. When the screen shown on the right ap

Character EntryYou can enter characters on this printer when the Numeric buttons (A) on the Operation Panel are lit. Follow the procedure below.1. Yo

TroubleshootingStandard setupThe Target Access Point is Not DetectedIs the network device (router, etc.) turned on? If the network device is already t

When you have only one access point:Select Use one AccessPoint only, then press the OK button. Select the MAC address of the target access point on th

WEPFailed to connect to the access point.Make sure that the WEP key entered for the access point is correct. In addition, when using WEP key number 2,

Setup GuideThis guide provides information for setting up a network connection for the printer.Network ConnectionWireless ConnectionPreparation for Co

To perform Standard setup again1. Press the MENU button (A).2. Use the buttons (B) to select WLAN setup, then press the OK button.

WPA/WPA2Failed to connect to the access point.Make sure that the passphrase entered for the access point is correct.If the problem is not resolved, th

To perform Standard setup again1. Press the MENU button (A).2. Use the buttons (B) to select WLAN setup, then press the OK button.

WPSCannot connect. Connections are being attempted from multiple access points simultaneously.The screen appears when connections are being attempted

Advanced setupThe Target Access Point is Not DetectedIs the network device (router, etc.) turned on? If the network device is already turned on, turn

When using multiple access points:Select Use multiple AccessPoints, then press the OK button.An Unknown Access Point is DisplayedAccess points in use

DisableFailed to connect to the access point.Is the network device (router, etc.) turned on? If the network device is already turned on, turn it off,

WEPThe WEP Key is Not Displayed AutomaticallyRefer to the manual supplied with the access point or contact its manufacturer.Failed to connect to the a

The device may not be able to connect to the network in the following cases:If the DHCP function of the access point is inactive, enable the DHCP func

WPA/WPA2The Passphrase is Not Displayed AutomaticallyRefer to the manual supplied with the access point or contact its manufacturer.Failed to connect

Network ConnectionWireless Connectiona Preparation for ConnectionBefore Starting Wireless Connection Setup1. Make sure that the printer is turned on

To perform Advanced setup again1. Press the MENU button (A).2. Use the buttons (B) to select WLAN setup, then press the OK button.

2. Use the buttons (A) to select the WLAN setup icon.3. Press the OK button (B).The (blue) Wi-Fi lamp (C) lights up when wireless connection

d-A Push Button Methodd Connection Using WPS1. Press and hold the WPS button on the access point.For details on pressing the WPS button, refer to t

d-B Standard setupd Connection via Standard setup1. Select Standard setup.2. Press the OK button.3. Select your access point, then press the OK b

9. When the left screen appears, press the OK button.10. When the screen shown on the right appears, press the COPY button (A).The network connection

d-C WPSd Connection Using WPS1. Select WPS.2. Press the OK button.3. Select Push button method.4. Press the OK button.5. Press the OK button.6.

d-D Other setup (Advanced setup)d Connection via Advanced setup1. Select Other setup.2. Press the OK button.3. Select Advanced setup.4. Press th