Canon DR 7550C - imageFORMULA - Document Scanner Manual de usuario descargar pdf (Pagina 48)

3-18

Chapter 3 Basic Operation

The Properties dialog box for the ISIS driver opens.

8. Set the scan settings.

Hint

For more information on specifying the scan settings, see “ISIS/

TWAIN Driver Settings Dialog Box” on p. 8-4.

9. Click the [OK] button to exit the scanner settings.

10.

Specify the file name and the file type for saving the

image data.

For details on the available settings in the [Scan Batch to

File Setting] dialog box, refer to the CapturePerfect 3.0

Operation Guide.

11.

Place your document and click [Save] to start

scanning.

IMPORTANT

You must load your documents as described below, depending

on the specified Feed Option setting.

• If the [Standard Feeding] Feed Option is enabled, load your

documents before scanning. When all of the documents have

been scanned, the Continue Scanning dialog box appears.

• If the [Manual Feeding] Feed Option is enabled, the

Separation Off key is lit and the Document Feed Tray is

raised. You must insert one page at a time to be scanned, and

press the Stop key to display the Continue Scanning dialog

box.

• If a Feed Option other than [Standard Feeding] or [Manual

Feeding] is selected, once you have started scanning, each

document placed in the Document Feed Tray is scanned, and

when no document is loaded, the scanner enters the standby

state.

Separation Off Key

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 153 154

Sin comentarios

Canon DR 7550C - imageFORMULA - Document Scanner Manual de usuario Pagina 48