Canon DR-X10C - imageFORMULA - Document Scanner Manual de usuario descargar pdf (Pagina 85)

5-20

Chapter 5 Maintenance

Imprinter Testing

After replacing an ink cartridge or cleaning the print head, perform

a test print to confirm proper printing. Test printing is performed by

the “Imprinter Test” User Mode selection.

IMPORTANT

Before performing an Imprinter Test, load a sheet of paper into the

Document Feed Tray.

■ Performing an Imprinter Test

Use the following procedure to execute the Imprinter Test.

1. Load a sheet of paper into the Document Feed Tray

for test printing.

2. Press the Menu key on the control panel.

The User Mode is activated.

3. Press the [ ] key twice to display “Imprinter Test”.

4. Press [Enter].

The Imprinter Test is enabled.

5. Press the [ ] key to select [OK], and press [Enter].

The test print is executed.

IMPORTANT

If no paper is loaded for test printing, the imprinter test finishes

without printing.

6. Press the [Stop] key to exit the User Mode.

Menu Key

Enter Key

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 154 155

Sin comentarios

Canon DR-X10C - imageFORMULA - Document Scanner Manual de usuario Pagina 85