Canon C50Fi - VB Network Camera Manual de usuario descargar pdf (Pagina 175)

6-5

Using the Picture Recording Function

Using the Audio Playback/Recording Function Linked to an External Device

Sample Settings

Settings specified on the “Camera and Video” page (→ P.3-8)

Specify the appropriate settings for the VB-C50FSi being used.

Settings specified on the “Preset” page (→ P.3-12)

Set a camera angle that shoots the open doorway as Preset 1.

Photographic conditions specified in “External Device Input Setting Tool” (→ P.4-50)

● In the “Normal Schedule Setting” screen (→ P.4-25), select a schedule and then select “Weekly

on” in the “Schedule” tab. Select all the days of the week, set the start time to “17:00” and the

end time to “06:00”.

● In the “Service” tab, select “Input 1” in “External Device Input”, then select “Setting Number”

and click the “Detail” button.

● Enter the external device input name.

● Set “Camera Preset” to “Preset1”.

● Select “Recording at ON event”.

● Set “Pre-event” to “3” seconds and “Interval” to “1.0” second. An image will then be recorded

every second for 3 seconds before the door is opened.

* With pre-event recording, the image is not recorded from the moment external input turns on.

● Set “Post-event” to “7” seconds and “Interval” to “1.0” second. An image will then be recorded

every second for 7 seconds from the moment the door is opened.

* With post-event recording, the image is recorded from the moment external input turns on.

●

Select “Enable audio recording concurrently with picture”.*

* Only available with a particular model of the VB-C50FSi (→ P.iii)

● Select “Playback at ON event” in “Audio Playback”, then select “Sound Clip”. Register a

playback sound beforehand (→ P.4-57). Use “Volume” to check the sound played back and

set the adequate volume.

COPY

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 237 238

Sin comentarios

Canon C50Fi - VB Network Camera Manual de usuario Pagina 175