Canon DC20 E Especificaciones descargar pdf (Pagina 142)

DC10 E, DC20 E

SERVICE MODE / ADJUSTMENT

5-2-7 CCD Image Adjustment Result Check (Low Temperature)

For this adjustment, use the same conditions as those specified in 5-2-2 Iris Adjustment (Coarse Adjustment)

SPEC. Automatic writing

Procedure)

(1) Check and write the result data of CCD image adjustment.

Note)

If the result of any one of the above check steps is NG, carry out the adjustment procedures described in item 5-2 “CCD Section (1)”

again from the beginning while maintaining the internal camera temperature within the allowable range. If NG is indicated repeat-

edly, replace the CCD PCB with a new one.

Note)

For details of the error codes, refer to p.30.

STEP PROCEDURE Microcomputer operation

RESULT CHECK CS Function MD ADDR DT

1 1) Make the setting shown at right. 2 08 ST 3017 -- Color difference check

2) Perform storing.

↑↑

Adjustment is completed.

(press the PAUSE button.) Completion with ST:05, NG with ST:09

2 1) Make the setting shown at right. 2 08 ST 3018 -- Noise check

2) Perform storing.

↑↑

Adjustment is completed.

(press the PAUSE button.) Completion with ST:05, NG with ST:09

3 1) Make the setting shown at right. 2 08 ST 3019 -- Check result writing

2) Perform storing.

↑↑

Adjustment is completed.

(press the PAUSE button.) Completion with ST:05, NG with ST:09

MONITOR

Fig. 16

STATUS

(ST)

ERROR No. TOTAL CER NER

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 205 206

Sin comentarios

Canon DC20 E Especificaciones Pagina 142