
22
These instructions are continued from Chapter 1.
1
Turn the <5> dial to select [Address
setting], and then press <0>.
2
If you set the DNS server setting to
[Disable], the screen on the left is
displayed.
Press <0> to select the input
position, and then turn the <5> dial
to enter the IP address of the FTP
server.
If you set the DNS server IP address
setting to [Auto assign] or [Manual
setting], the screen on the left is
displayed.
For instructions on screen operations,
see “Virtual Keyboard Operation”
(p.20).
Enter the FTP server’s server name
or IP address.
3
In [Port number setting], enter
00021, in most cases.
Turn the <5> dial to select [OK], and
then press <0> to go to the next
screen.
Configuring FTP Communication Settings
Comentarios a estos manuales