Canon EOS-1D X Manual de usuario Pagina 80

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 79
80
Steps 1–5 are the same on master and slave cameras.
Connect the EOS-1D X cameras to each other with a LAN cable. When
there are multiple slave cameras, connect them to a hub with LAN
cables, and connect the hub to the master camera with a LAN cable.
1
On the [53] tab, select
[Communication settings].
2
Select [Network settings].
Once [Communication func] is set
to [Enable], you can select [Network
settings].
3
Set [Communication mode] to
[Disconnect].
Once [Communication mode] is set
to [Disconnect], you can select
[Sync time between cameras].
Synchronizing the Time
Synchronize the camera time between the same camera models.
If the camera models of the master camera and the slave camera are
different, the time or zone set on the slave camera may differ from the one
set on the master camera.
Vista de pagina 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 115 116

Comentarios a estos manuales

Sin comentarios