Canon imagePROGRAF iPF685 Guía básica Pagina 93
- Pagina / 135
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Cause Corrective Action
Cut Speed is not configured correctly in the
Control Panel menu.
Change the Cut Speed setting in the Control Panel menu.
(See "Menu Structure.") ➔P.50
During cutting, printed documents fall out at
an angle.
In the Control Panel menu, set Cutting Mode to Eject. Hold documents after print-
ing, as they are cut.
(See "Specifying the Cutting Method for Rolls.") ➔ User's Guide
Paper is not cut
Paper is not cut
Cause Corrective Action
In the printer driver, No or Print Cut Guideline is specified
in Automatic Cutting.
Specify Yes in Automatic Cutting in the printer driver.
(See "Page Setup Sheet (Windows).") ➔User's Guide
(See "Paper Detailed Settings Dialog Box (Mac OS).") ➔ User's Guide
In the Control Panel menu, Cutting Mode is set to Eject
or Manual.
If the Cutting Mode is Eject, press the Cut button to cut the paper.
If the Cutting Mode is Manual, cut rolls with scissors or the like.
(See "Specifying the Cutting Method for Rolls.") ➔ User's Guide
Depression on the leading edge is left
Depression on the leading edge is left
Cause Corrective Action
Keeping a roll in the printer for a long time
without printing on it may leave a depres-
sion on the leading edge.
When printing quality is most important, we recommend setting TrimEdge Reload to
On or Automatic so that the paper edge is automatically cut before printing.
(See "Menu Structure.") ➔P.50
The size of clear film cannot be detected
The size of clear film cannot be detected
Cause Corrective Action
The Platen is soiled with ink or other substances. Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.") ➔ P.41
Roll Paper is Continuously Ejected
Roll Paper is Continuously Ejected
Cause Corrective Action
Although sheets are
selected as the paper
source, a roll was ad-
vanced.
After roll ejection stops, follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Open the Roll Cover.
3.
Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time, ensure that
both ends of the roll are rewound evenly.
4.
Pull the Release Lever forward.
5.
Load the roll. At this time, be sure to press the Load button and select "Load Roll Paper".
(See "Loading Rolls in the Printer.") ➔ P.15
iPF685 Series
Paper is not cut
Basic Guide
Troubleshooting Problems Regarding Paper
93
- Large Format Printer 1
- Safety Precautions 2
- In an Emergency 3
- Cleaning the Printer 3
- Pacemakers 3
- Moving the Printer 3
- FCC Regulations (U.S.A) 4
- For CA, USA Only 5
- Trademarks 5
- Copyright 5
- Legal Notice 5
- Manuals for this printer 6
- About This User Manual 10
- Handling Paper 12
- No attachment 13
- Loading Rolls in the Printer 15
- Not prin 17
- Handling sheets 21
- Removing Sheets 23
- Consumables and Maintenance 25
- Remove the Ink Tank 26
- Installing Ink Tanks 27
- Important 28
- Replacing Ink Tanks 29
- Printheads 30
- Replace the Printhead 31
- Replacing the Printhead 33
- (See "Menu Set 35
- (See "Automatic Ad 35
- Maintenance Cartridge 36
- Cleaning the Printhead 43
- Printer Parts 45
- Menu Operations 47
- Specifying menu items 48
- Specifying numerical values 48
- Executing menu commands 49
- Menu Structure 50
- Ink Menu 51
- Job Menu 51
- Set./Adj. Menu 52
- Printer parts 57
- (See "Stand.") 58
- Top Cover (Inside) 59
- Roll Cover (Inside) 60
- Carriage 60
- Left Side Right Side 61
- Ink Tank Cover (Inside) 61
- Printer Relocation 62
- Reinstalling the Printer 65
- Assemble the stand (optional) 66
- Install the printer 66
- Software Installation 69
- Installing the Software 71
- Print Preview 73
- 2. Access the Main pane 74
- Width to print rotated pages 75
- Large-Format Printing 77
- Adjusting the Printhead 79
- Adjusting the feed amount 81
- Method.") ➔P.81 82
- Adjusting Line Length 83
- Troubleshooting 84
- Clearing Jammed Roll Paper 85
- Clearing a Jammed Sheet 87
- Printing does not start 94
- Lines are misaligned 102
- Cannot print over a network 103
- Installation problems 104
- HP-GL/2 problems 106
- User's Guide 107
- Other problems 108
- Releasing ink level detection 109
- Ink level detection 109
- Basic Guide 110
- Ink Level Detection 111
- Error Message 112
- Cause Corrective Action 120
- Messages regarding ink 121
- Cannot adjust paper feed 123
- Messages regarding printheads 124
- Execute printhead cleaning 125
- Messages regarding HP-GL/2 129
- Other Messages 130
- Error Message Other Messages 131
- Error Messages 132
- Error Message Error Messages 133
- © CANON INC. 2013 135
Relacionado con productos y manuales para Impresoras De Gran Formato Canon imagePROGRAF iPF685
Impresoras De Gran Formato Canon iPF760 Guía básica
(132 paginas)
(132 paginas)
Impresoras De Gran Formato Canon iPF815 Guía básica
(52 paginas)
(52 paginas)
Impresoras De Gran Formato Canon iPF765 Guía básica
(132 paginas)
(132 paginas)
Impresoras De Gran Formato Canon IPF710 Folleto
(8 paginas)
(8 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.065 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales