Canon imagePROGRAF iPF8100 Manual de usuario Pagina 198

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 814
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 197
Handling rolls
5. While holding the edge of the roll paper , lift the Release Lever .
6. Hold the roll edge as you gently pull it evenly to the position of the Ejection Guide (a) using the
both hands. Align the right side of the roll paper with the Paper Alignment Line (b) so that the
paper side is parallel to the line and lower the Release Lever .
Important
Be sure to follow steps 5 and 6. If paper cannot be advanced straight or if it wrinkles, it may jam or
rub against the Printhead .
Do not force the roll paper into alignment with the Paper Alignment Line (b). This may prevent the
paper from being advanced straight.
Note
Y ou can adjust the strength of vacuum holding paper against the Platen when the Release Lever
is open. If it is dif cult to load paper , press the or button on the Control Panel to adjust the
strength. Set vacuum stronger by pressing the button or weaker with the button. Three
settings are available.
184 Handling Paper
Downloaded from ManualsPrinter.com Manuals
Vista de pagina 197
1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 813 814

Comentarios a estos manuales

Sin comentarios