Canon imagePROGRAF iPF8100 Manual de usuario Pagina 755

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 814
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 754
Problems with the printing quality
Problems with the printing quality
Printing is faint
Cause Corrective Action
Y ou may be printing on the wrong side of the paper . Print on the printing surface.
The Printhead nozzles are clogged. Print a test pattern to check the nozzles and see if
they are clogged.
( P .695)
Because the printer was left without Ink T anks
installed for some time, ink has become clogged in
the ink supply system.
After the Ink T ank has been installed for 24 hours,
run Head Cleaning B .
( P .696)
Paper is jammed inside the T op Cover . Follow the steps below to remove the jammed piece
of paper inside the T op Cover .
1. Press the Online button to bring the printer of ine.
2. Open the T op Cover and make sure the Carriage
is not over the Platen .
3. Remove any scraps of paper inside the T op Cover
.
4. Close the T op Cover .
For tips on clearing paper jams, refer to the following
topics.
Clearing Jammed Roll Paper (→P .201)
Clearing a Jammed Sheet (→P .217)
During borderless printing, the ink was not dry
enough before cutting.
Specify a longer drying period in the printer menu, in
Roll DryingT ime in Paper Details .
( P .49)
Printing may be faint if Print Quality in Advanced
Settings in the printer driver is set to Standard or
Draft .
In Advanced Settings in the printer driver , choose
Highest or High in Print Quality .
( P .243)
T roubleshooting 741
Downloaded from ManualsPrinter.com Manuals
Vista de pagina 754
1 2 ... 750 751 752 753 754 755 756 757 758 759 760 ... 813 814

Comentarios a estos manuales

Sin comentarios