Canon DR 2010C - imageFORMULA - Document Scanner Manual de usuario descargar pdf (Pagina 61)

Back Previous Page Next Page

Contents

Select [Canon DR-2510C] or [Canon DR-2010C] → click [OK].

NOTE

If [Canon DR-2510C] or [Canon DR-2010C] is not displayed in the list of scanners,

reinstall the ISIS/TWAIN driver. (See "Installing the Software," on p. 13)

Select the default page size from the drop-down list → click [OK].

NOTE

• The [Configure Device Settings] dialog box is displayed only when you select

[Canon DR-2510C] or [Canon DR-2010C] for the first time and click [OK], or

when you click [Setup] for [Scanner Selection].

• The settings here are applied when you click the [Default] button on the ISIS

driver properties dialog box.

• For a TWAIN driver, the default value is set to "LTR" and cannot be changed.

From the [Scan] menu, select [Scanner Setting].

The ISIS/TWAIN driver properties dialog box is displayed.

Scanner selection under Mac OS X

As an example, the following explanation describes the procedure when using

Image Capture, a standard-installed application for Mac OS X.

Start Image Capture.

To start Image Capture, click the hard disk icon (e.g. [Macintosh HD]), the

[Applications] folder, and then the [Image Capture] icon.

Click [Browse Devices] in the [Devices] menu.

Select the scanner you want to use, and select the [Use TWAIN software]

check box.

Click [OK].

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 117 118

Sin comentarios

Canon DR 2010C - imageFORMULA - Document Scanner Manual de usuario Pagina 61