Canon DR 2010C - imageFORMULA - Document Scanner Manual de usuario descargar pdf (Pagina 96)

Back Previous Page Next Page

Contents

If scanned images contain streaks, or if the scanned documents become dirty,

the sensor glass or rollers inside the scanner may be dirty. Clean them

periodically.

Open the document feed tray (See p. 23).

Press the OPEN knob from both sides (c), and pull the front unit out and

downward to open it (

d).

Use compressed air to remove dust and paper particles from the inside of

the scanner.

Use a clean dry cloth to wipe dirt off the sensor glass.

Wipe both the front and back sensor glasses.

CAUTION

Do not spray water or neutral detergent directly on the scanner. Precision

mechanisms, such as the light source, may get wet, and cause a malfunction.

IMPORTANT

Scratches on the sensor glass may cause marks on the images, as well as

feeding errors. If there are scratches on the sensor glass, contact your local

authorized Canon dealer or service representative.

Clean the c rollers by wiping the exposed part without turning them.

Clean the

d rollers while turning them. Wipe the rollers with a cloth that

has been dampened with water and thoroughly wrung out, and then use a

dry, soft cloth to wipe away any moisture.

Cleaning the Sensor Glass and the Rollers

Scanning Glass

Retard roller

Feeding roller

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 117 118

Sin comentarios

Canon DR 2010C - imageFORMULA - Document Scanner Manual de usuario Pagina 96