Canon MP490 series Manual de instrucciones Pagina 668

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 726
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 667
Advanced Guide
>
Troubleshooting
>
Problems with Scanning
> Error Message Appears and the ScanGear (Scanner
Driver) Screen Does Not Appear
Error Message Appears and the ScanGear (Scanner Driver)
Screen Does Not Appear
Check 1: Make sure that the machine is turned on.
Check 2: Connect the USB cable to a different USB port on the computer.
Check 3: If the USB cable is connected to a hub, remove it from the hub
and connect it to a USB port on the computer.
Check 4: Make sure that the MP Drivers is installed.
If it is not installed, insert the
Setup CD-ROM
into the computer's disc drive, then select Custom Install
and install MP Drivers.
Check 5: On the File menu of the application, select Select Source and
select the machine.
Note
The operation may differ depending on the application.
Check 6: Make sure that the application is TWAIN-compliant.
You cannot open ScanGear (scanner driver) from applications not supporting TWAIN.
Check 7: Exit ScanGear (scanner driver) if it is running on another
application.
Page top
Page 668 of 726 pagesError Message Appears and the ScanGear (Scanner Driver) Screen Does Not ...
Vista de pagina 667
1 2 ... 663 664 665 666 667 668 669 670 671 672 673 ... 725 726

Comentarios a estos manuales

Sin comentarios