Canon EOS R Manual de usuario

Chapters ContentsIndex to Features IndexChapters ContentsIndex to Features IndexENGLISHAdvanced User Guide

10Chapters ContentsIndex to Features IndexChapters ContentsIndex to Features IndexCompatible CardsThe following cards can be used with the camera rega

100Setting the White Balance[O] Custom White Balance With custom white balance, you can manually set the white balance for the specic light source of

101Setting the White Balance oIf the exposure obtained in step 1 diers greatly from the standard exposure, a correct white balance may not be obtaine

102u White Balance CorrectionN You can correct the white balance that is set. This adjustment will have the same eect as using a commercially availab

103White Balance CorrectionWhite Balance Auto BracketingWith just one shot, three images with dierent color tones can be recorded simultaneously. Bas

104Auto Correction of Brightness and ContrastN If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automa

105Setting Noise ReductionN High ISO Speed Noise ReductionThis function reduces the noise generated in the image. It is especially eective at high IS

106Setting Noise ReductionCautions for Setting Multi Shot Noise Reduction oIf there is signicant misalignment in the image due to camera shake, the n

107Setting Noise ReductionLong Exposure Noise ReductionFor images exposed for 1 sec. or longer, noise (dots of light and banding) typical of long expo

108Setting Noise Reduction oWith [Auto] or [Enable] set, the noise reduction process after the picture is taken may take the same amount of time as th

109Highlight Tone PriorityNYou can reduce overexposed, clipped highlights.1 Select [z3: Highlight tone priority].2 Set an option. z[Enable]: Improves

11Chapters ContentsIndex to Features IndexChapters ContentsIndex to Features Index12345678ChaptersIntroduction 2Preparation and Basic Operations 39 Sh

110Correction of Lens Aberrations due to Optical CharacteristicsN Peripheral light fall-o is a phenomenon that makes the image corners look darker du

111Correction of Lens Aberrations due to Optical Characteristics3 Select [Enable]. zConrm that the name of the attached lens and (except for diracti

112Correction of Lens Aberrations due to Optical CharacteristicsDigital Lens Optimizer oDepending on shooting conditions, noise may be intensied toge

113Correction of Lens Aberrations due to Optical CharacteristicsChromatic Aberration Correction[Chromatic aberr corr] is not displayed when [Digital L

114Correction of Lens Aberrations due to Optical CharacteristicsLens Correction DataThe lens correction data for lens aberration corrections is regist

115Reducing FlickerN If you shoot an image with a fast shutter speed under a light source such as uorescent light, the blinking of the light source

116Reducing Flicker oIn the [t], [d], or [f] mode, if the shutter speed changes during continuous shooting or if you shoot multiple shots of the same

117Setting the Color SpaceN The range of reproducible colors is called “color space”. With this camera, you can set the color space for captured imag

118Card ReminderYou can set the camera not to shoot unless there is a card in the camera. The default setting is [Enable].1 Select [z1: Release shutte

119Setting the Metering TimerNYou can set how long the metering timer runs (which determines the duration of exposure display/AE lock) after it is tri

12ContentsIntroduction 2Item Check List... 3Instruction Manuals ...

120Exposure SimulationNExposure simulation simulates and displays how the brightness (exposure) of the actual image will look.1 Select [z3: Expo. simu

121Appending Dust Delete DataNNormally, the Self Cleaning Sensor Unit will eliminate most of the dust that may be visible on captured images. However,

122Appending Dust Delete Data3 Shoot a solid-white object. zAt a distance of 20–30 cm (0.7–1.0 ft.), ll the screen with a patternless, solid-white ob

123AFully Automatic Shooting (Scene Intelligent Auto)[A] is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automa

124Fully Automatic Shooting (Scene Intelligent Auto) gFor moving subjects, the AF point is displayed in blue and tracks subject movement. The camera d

125Fully Automatic Shooting (Scene Intelligent Auto) FAQ zFocusing is not possible (indicated by an orange AF point).Aim the AF point over an area wit

126A Full Auto Techniques (Scene Intelligent Auto)Recomposing the ShotDepending on the scene, positioning the subject toward the left or right to incl

127Full Auto Techniques (Scene Intelligent Auto)Scene IconsIn the [A] shooting mode, the camera detects the scene type and sets everything automatical

128Information Display (Still Photo Shooting)For details on the icons displayed for still photo shooting, see page 619. oWhen <g> is displayed i

129Cautions for Still Photo Shooting oDo not point the camera toward an intense light source, such as the sun or an intense articial light source. Do

13Contentsd Touch-Screen Operation ... 67Q Quick Control ...

130x Shooting with the Touch ShutterJust by tapping on the screen, you can focus and take the picture automatically.1 Enable the Touch Shutter. zTap [

131Shooting with the Touch Shutter oEven if you set the drive mode to <o> or <i>, the camera will still shoot in the single shooting mode.

132d: Program AEThe camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE.* [d] stands

133Program AE oIf the “30"” shutter speed and the lowest f/number blink, it indicates underexposure.Increase the ISO speed or use ash. oIf the “

134s: Shutter-Priority AEIn this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the standard exposure matchi

135Shutter-Priority AE oIf the lowest f/number blinks, it indicates underexposure.Turn the <6> dial to set a slower shutter speed until the aper

136f: Aperture-Priority AEIn this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposu

137Aperture-Priority AE oIf the “30"” shutter speed blinks, it indicates underexposure.Turn the <6> dial to set a larger aperture (lower f

138a: Manual ExposureIn this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indi

139Manual ExposureExposure Compensation with ISO AutoIf the ISO speed is set to [AUTO] for manual exposure shooting, you can set exposure compensation

14ContentsCard Reminder ... 118Setting the Image Review Time...

140t: Flexible-Priority AEIn this mode, you can set shutter speed, aperture, and ISO speed manually or automatically and combine these settings with y

141Flexible-Priority AECombinations of Functions in [t] ModeShutter SpeedAperture ISO SpeedExposure CompensationShooting Mode[AUTO] [AUTO][AUTO]Availa

142General Still Photo Shooting CautionsImage Quality oWhen you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticea

143General Still Photo Shooting CautionsImages and Display oUnder low- or bright-light conditions, the displayed image may not reect the brightness o

144i Selecting the Drive ModeSingle and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. 1 Press the &

145 Selecting the Drive Mode With Servo AF shooting:When [AF operation] is set to [Servo AF], the continuous shooting speed of max. approx. 5.0 shots

146 Selecting the Drive Mode oApprox. 8.0 shots/sec. is the maximum <o> high-speed continuous shooting speed (p.144) under these conditions: sho

147j Using the Self-Timer Use the self-timer when you want to be in the picture such as a commemorative photograph. 1 Press the <B> button (9).

148Using the Self-Timer o<l> enables you to shoot without touching the camera mounted on a tripod. This prevents camera shake if you shoot still

149Selecting the Display Speed for High-Speed Continuous ShootingNHigh-speed display that switches between your shot and the live image is available w

15ContentsBULB: Long (Bulb) Exposures ... 158w: HDR (High Dynamic Range) Shooting ... 1

150Silent Live View ShootingNYou can adjust the camera’s drive and shutter operating characteristics to suit shooting conditions or the lens used.1 Se

151Silent ShootingNYou can shoot silently, using the sensor’s electronic shutter feature, instead of with the mechanical shutter normally used in stil

152q Selecting the Metering ModeNYou can select one of four methods to measure the subject brightness. In [A] mode, evaluative metering is set automat

153Selecting the Metering Mode oBy default, the camera will set the exposure as follows.With [q] (Evaluative metering), holding down the shutter butto

154O Setting the Desired Exposure CompensationNExposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exp

155h Auto Exposure Bracketing (AEB)NBy changing the shutter speed, aperture, or ISO speed automatically, you can bracket the exposure up to ±3 stops i

156Auto Exposure Bracketing (AEB)If [z3: Auto Lighting Optimizer] (p.104) is set to any setting other than [Disable], the eect of AEB may be reduced.

157A Locking the Exposure for Shooting (AE Lock)NYou can lock the exposure when you want to set the focus and exposure separately or when you are to t

158BULB: Long (Bulb) ExposuresIn this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go

159Long (Bulb) Exposures oWith [z5: Long exp. noise reduction], you can reduce the noise generated during long exposures (p.107). oFor bulb exposures,

16ContentsTab Menus: AF (Movies)... 259Selecting the AF Operation ...

160Long (Bulb) Exposures3 Set the desired exposure time. zSelect the hour, minute, or second. zPress <0> to display <r>. zSet the desired

161w: HDR (High Dynamic Range) ShootingNYou can shoot still photos with clipped highlights and shadows reduced for a high dynamic range of tones even

162HDR (High Dynamic Range) ShootingEects z[P] NaturalFor images preserving a wide tonal range where the highlight and shadow details would otherwise

163HDR (High Dynamic Range) Shooting4 Set a [Continuous HDR] option. zSelect an option, then press <0>. zWith [1 shot only], HDR shooting will b

164HDR (High Dynamic Range) Shooting oRAW HDR images are captured in JPEG73 image quality. RAW+JPEG HDR images are captured in the specied JPEG image

165HDR (High Dynamic Range) Shooting oWhen shooting HDR images with [Auto Image Align] set to [Enable], AF point display information (p.309) and Dust

166P Multiple ExposuresNAs you shoot multiple exposures (2–9), you can see how the images will be merged into a single image.1 Select [z5: Multiple ex

167Multiple Exposures3 Set [Multi-expos ctrl]. zSelect the desired multiple-exposure control method, then press <0>. zAdditiveThe exposure of ea

168Multiple Exposures5 Specify the images to save. zTo save all single exposures and the multiple-exposure image, select [All images] and press <0&

169Multiple Exposures8 Shoot the next exposures. zWhen [On:Func/Ctrl] is set, images captured so far are displayed merged. To display only the current

17Contentsk Enjoying Movies ... 324k Playing Back Movies ...

170Multiple Exposures oThe image quality, ISO speed, Picture Style, high ISO speed noise reduction, color space, etc. set for the rst single exposure

171Multiple ExposuresMerging Multiple Exposures with an Image Recorded on the CardYou can select a RAW image recorded on the card as the rst single e

172Multiple Exposures oThe ISO speed, Picture Style, high ISO speed noise reduction, color space, etc. set for the rst image will also be applied for

173Multiple Exposures FAQ zAre there any restrictions on the image quality?All single exposures and the multiple-exposure image are captured at your s

174Remote Control ShootingWireless Remote Control BR-E1 (sold separately) compatible with Bluetooth® low energy technology enables remote control shoo

175Remote Control Shooting4 Take the picture. zBy pressing the <2> button on the remote control, you can also autofocus. zTo shoot, press the re

176Using a Remote SwitchYou can shoot by connecting Remote Switch RS-60E3 (sold separately).For operating instructions, refer to the remote switch ins

177D Flash PhotographyEL/EX Series Speedlites for EOS CamerasUsing an EL/EX series Speedlite (sold separately) makes ash photography easy.For operati

178Flash PhotographyCanon Speedlites Other Than the EL/EX Series zWith an EZ/E/EG/ML/TL-series Speedlite set to A-TTL or TTL autoash mode, the ash c

179Setting the Flash FunctionNWith an EL/EX series Speedlite having compatible ash function settings, you can use the camera’s menu screen to set the

18ContentsSetting Power-Saving Features... 377Adjusting the Screen Brightness ...

180Setting the Flash FunctionFlash FiringTo enable ash photography, set to [Enable]. To disable ash ring or enable only the AF-assist beam, set to

181Setting the Flash FunctionSlow SynchroYou can set the ash-sync speed for ash photography in [f] aperture-priority AE mode or [d] Program AE mode.

182Setting the Flash FunctionSafety FETo avoid overexposure from the ash ring during the day or at close range, the camera can automatically lower t

183Setting the Flash Function zFlash modeYou can select the ash mode to suit your desired ash photography.[E-TTL II ash metering] is the standard m

184Setting the Flash Function zWireless functions / Flash ratio controlWireless (multiple) ash photography is possible with radio or optical transmis

185Setting the Flash Function zShutter synchronizationNormally, set this to [First-curtain synchronization] so that the ash res immediately after th

186Setting the Flash Function zFlash exposure compensationYou can set ash exposure compensation up to ±3 stops in 1/3-stop increments.For details, re

187Setting the Flash FunctionFlash Custom Function SettingsFor details on the Speedlite’s Custom Functions, refer to the Speedlite’s (sold separately)

188188-2 Shooting Movies[Shooting Mode] Settings for MoviesTo prepare for movie shooting, press the <W> button, then press the <B> button

189Tab Menus: Movie Shooting zShooting 1p.192p.219p.202p.205p.220 zShooting 2p.245p.224p.245 zShooting 3p.249p.249p.246p.246p.247p.247p.248

19ContentsSetting Copyright Information ... 420Checking Other Information ...

190Tab Menus: Movie Shooting zShooting 4p.250p.250p.250p.250p.236p.250p.251In [y] mode, the following screens are displayed. zShooting 1p.192p.205p.20

191Index to Features: Movie ShootingShooting Mode z[y] [k] modes B p.209 z[t] mode B p.210 z[v] mode B p.211 z[M] mode B p.213Menus/Shooting Features

192Setting the Movie Recording QualityUnder the [z1: Movie rec quality] tab, select [Movie rec. size] to set the image size, frame rate, and compressi

193Setting the Movie Recording Quality oIf you change the [53: Video system] setting, also set [z1: Movie rec quality] again. oNormal playback of 4K,

194Setting the Movie Recording QualityMovie-Recording CoverageImage sensor coverage for movies varies depending on movie recording quality and cropped

195Setting the Movie Recording Quality zFrame rate (fps: frame per second) [2] 119.9fps/[8] 59.94fps/[6] 29.97fpsFor areas where the TV system is NTS

196Setting the Movie Recording Quality zMovie recording format [C] MP4All movies you shoot with the camera are recorded as movie les in MP4 format (

197Setting the Movie Recording QualityCards that Can Record MoviesFor details on cards that can record at each level of movie recording quality, see p

198Setting the Movie Recording Quality24.00pRecords movies at a frame rate of 24.00 fps.When [Enable] is set, you can select the movie recording quali

199Setting the Movie Recording QualityHigh Frame RateYou can shoot HD movies at a high frame rate of 119.9 fps or 100.0 fps. This is ideal for shootin

2Chapters ContentsIndex to Features IndexChapters ContentsIndex to Features IndexIntroductionBefore Starting to Shoot, Be Sure to Read the FollowingTo

20ContentsWi-Fi/Bluetooth Status Display ... 5377 Custom Functions / My Menu 539Tab Menus: Customization .

200Setting the Movie Recording QualityMovie Files Exceeding 4 GBEven if you shoot a movie exceeding 4 GB, you can keep shooting without interruption.

201Setting the Movie Recording QualityTotal Movie Recording Time and File Size Per MinuteFor details on le sizes and the recording time available at

202Setting the Sound RecordingYou can shoot movies while recording sound with the built-in stereo microphone or an external stereo microphone. You can

203Setting the Sound RecordingAttenuatorAutomatically suppresses sound distortion caused by loud noises. Even if [Sound rec.] is set to [Auto] or [Man

204Setting the Sound Recording oSounds from Wi-Fi operations may be captured with built-in or external microphones. During sound recording, using the

205Setting the Time CodeAs movies are recorded, a time code is also recorded automatically to keep track of the time for synchronization. Time codes a

206Setting the Time CodeMovie Recording CountYou can select how time is displayed on the movie shooting screen. zRec timeDisplays the time that has el

207Setting the Time CodeHDMI zTime codeTime codes can be added to movies as you record them to an external device via HDMI. ONo time code is added t

208Setting the Time CodeDrop FrameThe time code will not match the actual time when frames are counted in the time code if the frame rate is set to 2

209k Shooting Moviesy/k Autoexposure ShootingWhen the shooting mode is set to [y] or [k], autoexposure control will take eect to suit the scene’s cur

21Index to FeaturesPower zCharging the battery B p.40 zBattery level B p.49 zChecking battery information B p.387 zHousehold power outlet B p.582 zEco

210Shooting Moviest Shutter-Priority AE[t] mode enables you to set your preferred shutter speed for movies. ISO speed and aperture are set automatical

211Shooting Moviesv Aperture-Priority AE[v] mode enables you to set your preferred aperture for movies. ISO speed and shutter speed are set automatica

212Shooting MoviesNotes for [y], [k], [t], and [v] Modes oIn the [y] mode, the scene icon for the scene detected by the camera is displayed on the upp

213Shooting MoviesM Manual Exposure ShootingYou can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure

214Shooting Movies oFor movie shooting, the ISO speed cannot be expanded to L (equivalent to ISO 50). oWhen switching from still photo shooting to mov

215Shooting MoviesISO Speed in [M] ModeIn [M] mode, you can set the ISO speed manually or select [AUTO] to set it automatically. For details on the IS

216Shooting MoviesStill Photo ShootingStill photos cannot be taken during movie shooting. To take still photos, stop recording and change the [Shootin

217Cautions for Movie Shooting oDo not point the camera toward an intense light source, such as the sun or an intense articial light source. Doing so

218Notes for Movie Shooting oEach time you shoot a movie, a new movie le is created on the card. oThe movie’s eld of view coverage for shooting 4K,

219Movie CroppingNWith RF or EF lenses, movies can be cropped around the center of the image, as if using a telephoto lens.Shooting movies with EF-S l

22Index to FeaturesMetering zMetering mode B p.152Drive zDrive mode B p.144 zSelf-timer B p.147 zSilent LV shooting B p.150 zSilent shooting B p.151 z

220Movie Digital ISIn-camera image stabilization electronically corrects camera shake during movie shooting. This function is called “Movie digital IS

221Movie Digital ISCombination ISEven more eective correction is possible by shooting movies with Movie digital IS and a Combination IS-compatible le

222Shooting HDR MoviesYou can shoot high dynamic range movies that retain detail in highlights of high-contrast scenes.You can specify to shoot HDR mo

223Shooting HDR Movies5 Shoot an HDR movie. zShoot the movie in the same way as normal movie shooting. zFor details on le sizes and the recording tim

224a Shooting Time-lapse MoviesStill photos shot at a set interval can be stitched together automatically to create a 4K or Full HD time-lapse movie.

225Shooting Time-lapse Movies zEnableH(3840x2160)The movie is recorded in 4K quality. The aspect ratio is 16:9. The frame rate is 29.97 fps (6) for NT

226Shooting Time-lapse Movies6 Set the number of shots. zSelect [No. of shots]. zRefer to the [k: Time required] and [3: Playback time] to set the num

227Shooting Time-lapse Movies7 Select the exposure’s setting method. zSelect [Auto exposure]. zSelect an option, then press <0>. zFixed 1st fram

228Shooting Time-lapse Movies9 Set the beeper. zSelect [Beep as img taken]. zIf [Disable] is set, the beeper will not sound for shooting.(1) (2)10 Che

229Shooting Time-lapse Movies12 Read the message. zRead the message and select [OK].13 Take test shots. zAs with still photo shooting, set the exposur

23Index to FeaturesFlash zExternalashB p.177 zFlash exposure compensation B p.177 zFE lock B p.177 zFlash function settings B p.182 zFlash Custom

230Shooting Time-lapse Movies14 Press the movie shooting button. gThe camera will be ready to start shooting a time-lapse movie. zTo return to step 13

231Shooting Time-lapse Movies oUsing a tripod is recommended. oTaking test shots as in step 13 and shooting test movies for time-lapse movies beforeha

232Shooting Time-lapse Movies oDo not point the camera toward an intense light source, such as the sun or an intense articial light source. Doing so

233Shooting Time-lapse Movies oIf the shutter speed exceeds the shooting interval (such as for long exposures), or if a slow shutter speed is set auto

234Shooting Time-lapse Movies oIf you start time-lapse movie shooting while the white <s> temperature warning (p.253) is displayed, the image qu

235Shooting Time-lapse MoviesYou can use Wireless Remote Control BR-E1 (sold separately, p.174) to start and stop the time-lapse movie shooting. zWith

236Shooting Movies Set to Canon LogNCanon Log gamma curve leverages image sensor characteristics to capture a wide dynamic range for movies that will

237Shooting Movies Set to Canon Log5 Set the options as desired. zSet [View Assist.], [Color Matrix] [Characteristics], and [HDMI color space]. For de

238Shooting Movies Set to Canon Log zCanon Log zOn (8bit)Select when recording movies with Canon Log to the card. Also enables you to record to an ext

239Shooting Movies Set to Canon Log zView Assist.When played on the camera, these movies may look darker and have lower contrast than movies shot with

24Index to FeaturesImage Editing zRAW image processing B p.339 zResizing JPEGs B p.345 zCropping JPEGs B p.346Image Transfer/Print Order zImage tra

240Shooting Movies Set to Canon Log zColor MatrixUsing a color matrix, you can specify how colors are reproduced, to plan for postproduction processin

241Shooting Movies Set to Canon Log zCharacteristicsAdjust as needed. Select an item ([Sharpness: Strength], [Saturation], or [Hue]), adjust the eect

242Shooting Movies Set to Canon LogShooting Settings zShooting with ISO Auto is not possible, and if set to ISO Auto when Canon Log is specied, the s

243Shooting Movies Set to Canon LogGeneral Canon Log Shooting Precautions oHDR movies are not available when Canon Log is set. oSpecifying Canon Log w

244Menu Function Settings This section describes menus used for shooting movies.[z1] zMovie recording qualityFor details on movie recording quality,

245Menu Function Settings [z2] zLens aberration correctionMPeripheral illumination, distortion, and chromatic aberration can be corrected as you shoot

246Menu Function Settings [z3]M zExposure compensationMExposure compensation is available in a range of ±3 stops, in 1/3-stop increments. For details

247Menu Function Settings HISO AutoYou can set the maximum limit for ISO Auto in 4K movie shooting in [k], [t], or [v] mode or in [M] mode with ISO

248Menu Function Settings zk Auto slow shutterMYou can choose whether to shoot movies that are brighter and less noisy than when set to [Disable] by

249Menu Function Settings zMetering timerMFor details on the metering timer, see page 119. zk Av 1/8-stop incrementsMYou can set aperture values on a

25Safety InstructionsBe sure to read these instructions in order to operate the product safely.Follow these instructions to prevent injury or harm to

250Menu Function Settings [z4]M zWhite balanceMFor details on white balance, see page 97. zCustom White BalanceMFor details on custom white balance, s

251Menu Function Settings zHDMI displayYou can specify how movies are displayed as they are recorded via HDMI to an external device. Movie output its

252Menu Function Settings For Longer HDMI OutputTo continue HDMI output for longer than 30 min., select [A+a], then set [Auto power o] under [52: Po

253General Movie Shooting CautionsRed <E> Internal Temperature Warning Icon oIf the camera’s internal temperature increases due to prolonged mov

254General Movie Shooting CautionsRecording and Image Quality oIf you use a card with a slow writing speed, an indicator may appear on the right of th

2552553AFThis chapter describes autofocus operation and introduces menu settings on the AF ([2]) tab. zA M icon to the right of a page title indicates

256Tab Menus: AF (Still Photos) zAF1p.262p.265p.276p.277p.278p.279 zAF2p.283p.284

257Tab Menus: AF (Still Photos) zAF3p.288p.289p.290 zAF4p.296p.293p.295 zAF5p.297p.298p.299p.300Features in [23], [24], and [25] menus are described i

258Tab Menus: AF (Still Photos)In [A] mode, the following screen is displayed. zAF1p.278p.279p.263p.284

259Tab Menus: AF (Movies) zAF1p.265p.279p.286 zAF2p.283p.284

26Safety Instructions oObserve the following instructions when using a battery charger or AC adapter.• Periodically remove any dust buildup from the

260Tab Menus: AF (Movies) zAF3p.291p.292 zAF4p.293 zAF5p.297p.298Features in [23], [24], and [25] menus are described in the camera’s Help system (p.4

261Tab Menus: AF (Movies)In [y] mode, the following screen is displayed. zAF1p.279p.286p.284

262Selecting the AF OperationNYou can select the AF operation characteristics to suit the shooting conditions or subject.1 Select [21: AF operation].2

263Selecting the AF OperationOne-Shot AF for Still Subjects (ONE SHOT)Suited for still subjects. When you press the shutter button halfway, the camera

264Selecting the AF OperationAF-Assist BeamUnder low light, the AF-assist beam may be lit continuously when you press the shutter button halfway. This

265Selecting the AF MethodYou can select the AF method to suit the shooting conditions or subject. The camera attempts to focus on faces of any people

266Selecting the AF Method: Expand AF area (Z)Focusing uses one AF point <S> and points above, below, and to the left and right <w>. Eect

267Selecting the AF Method: Large Zone AF: VerticalUses auto selection AF in a vertical Large Zone AF frame to cover a larger area than Zone AF, which

268Selecting the AF MethodSelecting the AF MethodMYou can select the AF method to suit the shooting conditions or subject.If you prefer to focus manua

269Selecting the AF Method zu(face)+Tracking: cThe camera detects and focuses on human faces. If a face moves, the AF point <p> also moves to tr

27Safety Instructions CAUTION:Denotes the risk of injury. oDo not re the ash near the eyes.It may hurt the eyes. oStrap is intended for use on the b

270Selecting the AF MethodSpecifying a Subject for FocusOn the screen, tap where you want to focus, whether on a subject or at a certain position.Once

271Selecting the AF Method z1-point AF / Expand AF area (Z) / Expand AF area: Around / Zone AF / Large Zone AF: Vertical / Large Zone AF: HorizontalMY

272Selecting the AF Method3 Focus on the subject. zAim the AF point over the subject and press the shutter button halfway. gWhen focus is achieved, th

273Selecting the AF MethodMagnied ViewYou can check the focus by magnifying display by approx. 5x or 10x.Magnied view is not possible with [u+Tracki

274Selecting the AF MethodNotes for AFAF Operation zEven when focus is achieved, pressing the shutter button halfway will focus again. zImage brightne

275Selecting the AF MethodShooting Conditions that Make Focusing Dicult zSubject with low-contrast such as the blue sky, solid-color at surfaces or

276Setting the AF Point SizeNFor pinpoint focusing, you can set [AF frame size] to [Small].1 Select [21: AF frame size].2 Select an item.Only availab

277Focusing on People’s EyesNYou can shoot with the subject’s eyes in focus.1 Select [21: Eye Detection AF].2 Select [Enable].3 Aim the camera at t

278Setting Continuous AFThis function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button ha

279Setting Touch & Drag AFYou can move the AF point or Zone AF frame by touching or dragging on the screen as you look through the viewnder.Enabl

28Handling PrecautionsCamera Care zThis camera is a precision instrument. Do not drop it or subject it to physical shock. zThe camera is not waterpr

280Setting Touch & Drag AFActive Touch AreaYou can specify the area of the screen used for touch and drag operations.1 Set the active touch area.

281MF: Focusing ManuallyIf focusing is not possible with autofocus, you can magnify the image and focus manually.1 Set the lens’s focus mode switch to

282MF: Focusing Manually4 Adjust magnication. zEach press of the <B> button changes the magnication ratio, as follows.1x → 5x → 10x5 Focus man

283MF: Focusing ManuallySetting MF Peaking (Outline Emphasis)MEdges of subjects in focus can be displayed in color to make focusing easier. You can se

284MF: Focusing ManuallyFocus GuideSetting [Focus guide] to [On] provides a visual guide that shows which direction to adjust focus and the extent of

285MF: Focusing Manually oUnder dicult shooting conditions for AF (p.275), the guide frame may not be displayed correctly. oNo AF points are displaye

286Setting Movie Servo AFWith this function enabled, the camera focuses on the subject continuously during movie shooting.1 Select [21: Movie Servo AF

287Setting Movie Servo AFCautions When [Movie Servo AF] is Set to [Enable] oShooting Conditions that Make Focusing Dicult• A fast-moving subject app

288Customizing AF FunctionsN[23] zTracking sensitivity You can set the subject-tracking sensitivity, which aects responsiveness to interfering object

289Customizing AF Functions zAcceleration/deceleration tracking Sets the Servo AF tracking sensitivity for subjects that change speed suddenly, as by

29Handling Precautions zDo not block shutter curtain operation with your nger or other objects. Doing so may cause a malfunction. zUse only a commer

290Customizing AF Functions zAF point auto switching This sets the switching sensitivity of the AF points as they track the subject moving dramaticall

291Customizing AF Functions zMovie Servo AF track sensitivityYou can adjust the tracking sensitivity (to one of seven levels), which aects responsive

292Customizing AF Functions zMovie Servo AF speedYou can set the Movie Servo AF’s AF speed and its operation conditions.This function is settable when

293Customizing AF Functions[24] zLens electronic MFWith the USM and STM lenses equipped with electronic manual focusing, you can set whether to use el

294Customizing AF Functions [ ] Disable in AF modeManual focus adjustment is disabled when the lens’s focus mode switch is set to <AF>.With [On

295Customizing AF Functions zAF-assist beam ringEnables or disables the AF-assist beam of the camera or an external Speedlite for EOS cameras.1 Selec

296Customizing AF Functions zOne-Shot AF release priorityYou can specify whether to prioritize focus or release timing for One-Shot AF (except when sh

297Customizing AF Functions[25] zLens drive when AF impossibleIf focus cannot be achieved with autofocus, you can have the camera keep searching for t

298Customizing AF Functions zLimit AF methodsYou can limit the AF methods available to those that you will use.For details on AF methods, see page 265

299Customizing AF Functions zOrientation linked AF pointYou can assign AF points or Zone AF frames to dierent positions based on whether you are shoo

3Chapters ContentsIndex to Features IndexChapters ContentsIndex to Features IndexItem Check ListBefore starting, check that all the following items ar

30Handling PrecautionsScreen,Viewnder,andLCDPanel z Although the screen and viewnder are manufactured with very high precision technology with

300Customizing AF Functions zInitial Servo AF pt for cYou can set the initial AF point for Servo AF when the AF method is set to [Face+Tracking].1 Sel

3013014PlaybackThis chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the Playba

302Tab Menus: Playback zPlayback 1p.318p.317p.335p.353p.357p.348p.339 zPlayback 2p.346p.345p.321p.331p.313p.311 zPlayback 3p.307p.309p.309p.305p.206p.

303Index to Features: Playback and Related OperationsPlayback zSingle-image display B p.304 zShooting information display B p.305 zGrid display B p.3

304x Image PlaybackSingle-Image Display1 Play back the image. zPress the <x> button.2 Select an image. zTo play back newer images, press the <

305Image PlaybackShooting Information DisplayWith the shooting information screen displayed, you can press the <W> <X> keys to change the

306Image PlaybackTouch PlaybackThe camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like th

307Customizing Playback Information DisplayYou can specify screens and accompanying information displayed during image playback.1 Select [33: Playback

308Customizing Playback Information Display z[Brightness] displayThis histogram is a graph showing the distribution of the image’s brightness level. T

309Customizing Playback Information DisplayHighlight AlertWhen [33: Highlight alert] is set to [Enable], overexposed, clipped highlights will blink. T

31Part Names(20)(16)(12)(13)(14)(15)(17)(18)(19)(21)(22)(6)(7)(1)(2)(3)(4)(5)(8)(9)(10)(11)(1) <W> button(2) Movie shooting button(3) <6&g

310H Index Display (Multiple-Image Display)Search for images quickly with the index display showing 4, 9, 36, or 100 images on one screen.1 Press the

311e Jump Display (Jumping Through Images)In the single-image display, you can turn the <6> dial to jump through the images forward or backward

312Jump Display (Jumping Through Images)(1) (2)3 Browse by jumping. zPress the <x> button. zIn the single-image display, turn the <6> dial

313t Filtering Images for PlaybackYou can lter image display according to your search conditions. After setting the image search conditions, you can

314Filtering Images for Playback3 Apply the search conditions. zPress <0> and read the message displayed. zSelect [OK]. gThe search condition is

315u Magnifying ImagesYou can magnify your captured images.(1)1 Magnify the image. zDuring image playback, press the <u> button. gThe magnied v

316 Magnifying ImagesSetting the Initial Magnication Ratio and PositionIf you select [33: Magnicatn (apx)], you can set the initial magnication rat

317b Rotating ImagesYou can use this feature to rotate the displayed image to the desired orientation.1 Select [31: Rotate image].2 Select an image. z

318K Protecting ImagesYou can protect important images from being accidentally erased.Protecting a Single Image1 Select [31: Protect images].2 Select

319Protecting ImagesSpecifying the Range of Images to be ProtectedWhile looking at the images in the index display, you can specify the rst and last

32Part Names(3)(4)(5)(12)(14)(6)(8)(7)(9)(11)(10)(13)(15)(17)(19)(16)(18)(2)(1)(1) Eyecup(2) Viewnder eyepiece(3) Dioptric adjustment knob(4) Pow

320Protecting ImagesProtecting All Images in a Folder or on a CardYou can protect all the images in a folder or on a card at once.When you select [All

321p Setting RatingsYou can rate images on a scale of 1–5 (l/m/n/o/p). This function is called rating.Rating a Single Image1 Select [32: Rating].2 Sel

322 Setting RatingsRating by Specifying the RangeWhile looking at the images in the index display, you can specify the rst and last images for a rang

323 Setting RatingsRating All Images in a Folder or on a CardYou can rate all the images in a folder or on a card at once.Under [32: Rating], when you

324k Enjoying MoviesYou can play back and enjoy the captured movies mainly in the following three ways.Playback on a Television (p.333)By connecting t

325k Playing Back Movies1 Play back the image. zPress the <x> button.2 Select a movie. zPress the <Y> <Z> keys to select the movie t

326Playing Back MoviesMovie Playback PanelItem Playback Operations7 Play Pressing <0> toggles between playback and stop.8 Slow motionAdjusts the

327XEditing a Movie’s First and Last ScenesYou can edit out the rst and last scenes of a movie in approx. 1-sec. increments.1 Pause movie playback. g

328Editing a Movie’s First and Last Scenes5 Save the edited movie. zSelect [W], then press <0>. zThe save screen will appear. zTo save it as a n

329I Grabbing a Frame from 4K Movies or 4K Time-Lapse MoviesFrom 4K movies or 4K time-lapse movies, you can select individual frames to save as approx

33Part Names(9)(8)(11)(12)(14)(15)(16)(17)(13)(2)(1)(3)(4)(5)(6)(7)(10)(1) Contact cover(2) Accessory positioning hole(3) Screen(4) Tripod socket(

330Grabbing a Frame from 4K Movies or 4K Time-Lapse Movies7 Save the frame. zSelect [OK] to save the current frame as a JPEG still image.8 Select the

331Slide Show (Auto Playback)You can play back the images on the card as an automatic slide show.1 Specify the images to be played back. zTo play back

332Slide Show (Auto Playback)4 Start the slide show. zSelect [Start], then press <0>. gAfter [Loading image...] is displayed, the slide show wil

333Viewing Images on a TelevisionBy connecting the camera to a television with an HDMI cable, you can play back the captured still photos and movies o

334Viewing Images on a Television oAdjust movie sound volume with the television. The sound volume cannot be adjusted with the camera. oBefore connect

335L Erasing ImagesYou can either select and erase unnecessary images one by one or erase them in one batch. Protected images (p.318) will not be eras

336Erasing ImagesCheckmarking [X] Images to Be Erased in a BatchBy adding checkmarks to the images to be erased, you can erase all those images at onc

337Erasing ImagesSpecifying the Range of Images to Be ErasedWhile looking at the images in the index display, you can specify the rst and last images

338Erasing ImagesErasing All Images in a Folder or on a CardYou can erase all the images in a folder or on a card at once.When [31: Erase images] is s

339R Processing RAW Images with the CameraNYou can process 1 or F images with the camera and save them as JPEG images. As the RAW image itself does no

34Part NamesLCD PanelSample displayInformation displayed varies depending on camera status. For icon details, see page 617.ViewnderInformationDispl

340Processing RAW Images with the Camera3 Set the desired processing conditions.[Use shot settings] zImages are processed using image settings at the

341Processing RAW Images with the Camera5 Select the image to display. zSelect [Original image] or [Processed img.]. gThe selected image will be displ

342Processing RAW Images with the CameraRAW Image Processing Options z[ ] Brightness adjustmentYou can adjust the image brightness up to ±1 stop in 1/

343Processing RAW Images with the Camera z[ ] Color space (p.117)You can select either sRGB or Adobe RGB. Since the camera screen is not compatible wi

344Processing RAW Images with the Camera [ ] Chromatic aberration correction (p.113)Chromatic aberrations (color fringing along the subject’s outline

345S Resizing JPEG ImagesYou can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with

346N Cropping JPEG ImagesYou can crop a captured JPEG image and save it as another image. Cropping an image is possible only with JPEG images. Images

347Cropping JPEG Images zMoving the Cropping FramePress the <V> cross keys to move the frame vertically or horizontally. Move the cropping frame

348d Transferring Images to a Computer/FTP ServerYou can connect the camera to a computer and use the camera to transfer images from the card to the c

349Transferring Images to a Computer/FTP Server3 Set the power switch to <1>. zWhen a message to select a program is displayed on the computer,

35Part NamesBattery Charger LC-E6ECharger for Battery Pack LP-E6N/LP-E6 (p.40).(3)(4)(2)(1)(1) Charge lamp(2) Battery pack slot(3) Power cord(4) P

350Transferring Images to a Computer/FTP ServerSelecting Images to Transfer zSelecting Images1 Select [x1: Image transfer].2 Select [Image sel./transf

351Transferring Images to a Computer/FTP Server6 Transfer the image. zConrm that the main EOS Utility screen is displayed on the computer. zSelect [D

352Transferring Images to a Computer/FTP Server In a FolderSelecting [Folder images not transfer’d] selects all unsent images in the folder.Selecting

353W Digital Print Order Format (DPOF)DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing in

354Digital Print Order Format (DPOF)4 Exit the setting. zPress the <M> button. zNext, select [Sel.Image] or [Multiple] to specify the images to

355Digital Print Order Format (DPOF)Specifying Images for Printing zSelecting ImagesSelect and specify the images one by one.Press the <M> butto

356Digital Print Order Format (DPOF) All Images in a FolderSelect [Mark all in folder] and select the folder. A print order for one copy of all the i

357p Specifying Images for a PhotobookYou can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to import

358Specifying Images for a PhotobookSpecifying the Image Range for a PhotobookWhile looking at the images in the index display, you can specify the ra

359Specifying Images for a PhotobookSpecifying All Images in a Folder or on a CardYou can specify all the images in a folder or on a card at once for

36Part NamesAttaching the StrapPass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buc

360

3613615Set-upThis chapter describes menu settings on the set-up ([5]) tab. zA M icon to the right of a page title indicates that the function is avail

362Tab Menus: Set-up zSet-up 1p.365p.367p.370p.372p.373 zSet-up 2p.376p.377p.378p.379p.380p.383 zSet-up 3p.384p.385p.386p.387p.391p.395p.396

363Tab Menus: Set-up zSet-up 4p.397p.402p.402p.403p.406 zSet-up 5p.407p.411 zSet-up 6p.416p.417p.419p.420p.422p.422p.422 (not shown in movie mode)

364Tab Menus: Set-upWhen you are shooting movies, the following screen is displayed for [54].p.397p.402p.403p.404p.406In [A] and [y] modes, the follow

365Creating and Selecting a FolderYou can freely create and select the folder where the captured images are to be saved.Creating a Folder1 Select [51:

366Creating and Selecting a FolderSelecting a Folder(1) (2)(3) (4) zSelect a folder on the folder selection screen. zCaptured images are stored in you

367File Numbering MethodsThe captured images saved in a folder are assigned a le number from 0001 to 9999. You can change how the image les are numb

368File Numbering MethodsContinuousWhen you wish to continue the le numbering sequence even after the card is replaced or a new folder is created.Eve

369File Numbering MethodsAuto ResetWhen you wish to restart the le numbering from 0001 each time the card is replaced or a new folder is created.When

37Part NamesUsing the Cable ProtectorWhen connecting the camera to a computer, use the included interface cable or a genuine Canon cable.When connecti

370Renaming FilesFile names consist of four alphanumeric characters followed by a four-digit image number (p.367) and the le extension. You can chang

371Renaming Files zUse the <V> cross keys or <5> dial to select a character, then press <0> to enter it. zBy selecting [], you can c

372Setting the Auto Rotation of Vertical ImagesYou can change the auto rotation setting that straightens images shot in vertical orientation when they

373Formatting the CardIf the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera.Whe

374Formatting the Card Format the card in the following cases: zThe card is new. zThe card was formatted by a dierent camera or a computer. zThe card

375Formatting the Card oIt may not be possible to use SDXC cards formatted with this camera in other cameras. Also note that exFAT-formatted cards may

376Setting Eco ModeEnables you to conserve battery power in shooting mode. When the camera is not in use, the screen darkens to reduce battery consump

377Setting Power-Saving FeaturesYou can adjust the timing of when the screen, camera, and viewnder turn o automatically (Display o, Auto power o,

378Adjusting the Screen BrightnessScreen and viewnder brightness can be adjusted separately.1 Select [52: Disp. brightness].2 Make the adjustment. zR

379Adjusting the Screen Color ToneScreen and viewnder color tone can be adjusted separately.1 Select [52: Disp. color tone].2 Make the adjustment. zP

38Part NamesUsing an Optional Canon Interface Cable(5)When using a genuine Canon interface cable (sold separately), run the cable through the clamp (5

380Setting the Date, Time, and Time ZoneWhen you turn on the power for the rst time or if the date/time/zone have been reset, follow the steps below

381Setting the Date, Time, and Time Zone zPress the <Y> <Z> keys to select a [Time dierence] item (+/-/hour/minute), then press <0>

382Setting the Date, Time, and Time Zone oThe date, time, and time zone settings may be reset when the camera is stored without the battery, when its

383Setting the Interface Language1 Select [52: LanguageK].2 Set the desired language.

384Setting the Video SystemSet the video system of any television used for display. This setting determines the frame rates available when you shoot m

385Setting the Touch Control Response1 Select [53: Touch control].2 Select an item. z[Standard] is the normal setting. z[Sensitive] provides a more re

386Disabling Beeps for Camera OperationsYou can disable beeping when subjects are in focus or for other operations.1 Select [53: Beep].2 Select an ite

387Checking the Battery InformationYou can check the conditions of the battery you are using. By registering multiple batteries to the camera, you can

388Checking the Battery InformationRegistering Batteries to the CameraYou can register up to six LP-E6N/LP-E6 batteries to the camera. To register mul

389Checking the Battery InformationLabeling Batteries with Serial NumbersIt is convenient to label registered LP-E6N/LP-E6 battery packs with their se

39391Preparation and Basic OperationsThis chapter describes preparatory steps before you start shooting and the basic camera operations.

390Checking the Battery InformationChecking the Remaining Capacity of a Registered BatteryYou can check the remaining capacity of batteries not curren

391f Sensor CleaningSelf-cleaning of the front of the sensor is performed whenever you set the power switch to <2>.You can also activate sensor

392 Sensor CleaningSetting Auto Cleaning1 Select [Auto cleaningf].2 Select an item. zPress the <Y> <Z> keys to select an item, then press

393 Sensor CleaningManual Sensor CleaningMDust that could not be removed by automatic cleaning can be removed manually with a commercially available b

394 Sensor Cleaning oWhile cleaning the sensor, never do any of the following. If the power is cut o, the shutter will close. These may result in dam

395Setting the HDMI Output ResolutionSet the image output resolution used when the camera is connected to a television or external recording device wi

396RAW Playback on an HDR TVYou can view RAW images in HDR by connecting the camera to an HDR TV.1 Select [53: HDMI HDR output].2 Select [On]. oImage

397Customizing Information Displayed When ShootingYou can customize the details and screens of information shown on the camera or in viewnder when yo

398Customizing Information Displayed When ShootingCustomizing Information in the Viewnder1 Select [VF info/toggle settings].2 Select screens. zPress

399Customizing Information Displayed When ShootingVertical Viewnder DisplayYou can select how viewnder information is displayed when you are shootin

4Chapters ContentsIndex to Features IndexChapters ContentsIndex to Features IndexInstruction ManualsThe Instruction Manual included with the camera pr

40Charging the Battery1 Detach the protective cover provided with the battery.2 Fully insert the battery in the charger. zDo the opposite to remove th

400Customizing Information Displayed When ShootingSetting the HistogramYou can select the content and display size of the histogram.1 Select [Histogra

401Customizing Information Displayed When ShootingClearing SettingsYou can restore [Shooting info. disp.] defaults.1 Select [Reset].2 Select [OK].

402Setting a Priority for Shooting Display PerformanceYou can select the performance parameter to prioritize in shooting screen display for still phot

403Setting the Display ModeYou can select the display mode for shooting screens.1 Select [54: Display settings].2 Select an item. zAutoNormally use th

404Customizing Shutter Button FunctionalityYou can set the functions performed by pressing the shutter button halfway or completely during movie shoot

4051 HelpWhen [zHelp] is displayed below a menu, you can display a description about the feature by pressing the <B> button. Press it again to e

406HelpHelp Display Text SizeYou can change the text size for the Help display.1 Select [54: Help text size].2 Select an item. zExample: [z5: High ISO

407Setting Wireless FeaturesYou can connect the camera to a smartphone or computer wirelessly and send your shots or control the camera remotely.1 Sel

408Setting Wireless FeaturesShooting with a Remote ControlBy pairing the camera via Bluetooth with Wireless Remote Control BR-E1 (sold separately, sup

409Setting Wireless Features5 Select [Pairing]. zSelect [Pairing]. zPress and hold the <W> button and <T> button on the BR-E1 simultaneous

41Charging the BatteryCharge LevelCharge LampColor Display0–49%OrangeBlinks once per second50–74% Blinks twice per second75% or higherBlinks three tim

410Setting Wireless FeaturesCanceling the PairingBefore pairing with a dierent BR-E1, clear the information about the connected remote control.1 Sele

411Geotagging ImagesYou can geotag images with GPS Receiver GP-E2 (sold separately) or a Bluetooth enabled smartphone.Using GP-E21 Attach GP-E2 to the

412Geotagging ImagesUsing a SmartphoneThe dedicated application Camera Connect (free of charge) must be installed on the smartphone. For details on in

413Geotagging Images4 Select [Smartphone]. zSelect [Smartphone] in [Select GPS device]. gLocation information can now be acquired from the smartphone.

414Geotagging ImagesGPS connection displayYou can check the status of smartphone location information acquisition on the screens for still photo or mo

415Geotagging Images oThe smartphone can acquire location information only while it is paired with the camera via Bluetooth. oDirection information is

416R Setting the Multi-Function LockSpecify camera controls to lock when the Multi-function lock is enabled. This can help prevent accidentally changi

417w: Registering Custom Shooting ModesNYou can register current camera settings, such as shooting, menu, and Custom Function settings, as Custom shoo

418Registering Custom Shooting ModesMy Menu settings will not be registered under Custom shooting modes.You can also change shooting and menu settings

419Reverting the Camera to the Default SettingsN The camera’s settings for shooting functions and menu functions can be reverted to their defaults.1 S

42Charging the Battery zUpon purchase, the battery is not fully charged.Charge the battery before use. zRecharge the battery on the day before or on t

420Setting Copyright InformationN When you set the copyright information, it will be recorded to the image as Exif information.1 Select [56: Copyrigh

421Setting Copyright InformationChecking the Copyright InformationWhen you select [Display copyright info.] in step 2, you can check the [Author] and

422Checking Other Information zDownloading instruction manualsTo download instruction manuals, select [56: Manual/software URL] and scan the displayed

4234236Wi-Fi (Wireless Communication) FunctionsThis chapter describes how to send images via Wi-Fi® from the camera to a variety of compatible devices

424What You Can Do via Wi-Fi (Wireless Communication) Functions(CANON iMAGE GATEWAY)(4) Send images to a Web service(3) Print images using a Wi-Fi pr

425What You Can Do via Wi-Fi (Wireless Communication) Functions(1) q Communicate with a smartphone (p.427)Control the camera remotely and browse image

426What You Can Do via Wi-Fi (Wireless Communication) FunctionsBluetooth® FeaturesBy pairing the camera with a smartphone compatible with Bluetooth lo

427Connecting to a Smartphone via Wi-FiThis section describes how to directly connect the camera to a smartphone via Wi-Fi. zConnecting to a smartphon

428Connecting to a Smartphone via Wi-Fi zUse the latest version of the smartphone OS. zCamera Connect can be installed from Google Play or App Store.

429Connecting to a Smartphone via Wi-FiConnecting to a Bluetooth-compatible Smartphone via Wi-FiSteps on the Camera (1)1 Select [55: Wireless communic

43Inserting/Removing the BatteryLoad a fully-charged Battery Pack LP-E6N (or LP-E6) into the camera.Insertion 1 Slide the battery compartment cover lo

430Connecting to a Smartphone via Wi-Fi5 Select [Bluetooth function].6 Select [Bluetooth function].7 Select [Smartphone].8 Register [Nickname]. zWhen

431Connecting to a Smartphone via Wi-Fi9 Select [OK].10 Select [Pairing].11 Select an item. zIf Camera Connect is already installed, select [Do not di

432Connecting to a Smartphone via Wi-FiSteps on the Smartphone (1)12 Enable the Bluetooth function.13 Start Camera Connect.14 Select the camera to pai

433Connecting to a Smartphone via Wi-FiSteps on the Camera (2)16 Select [OK].17 Press <0>. zPairing is now complete, and the camera is connected

434Connecting to a Smartphone via Wi-FiSteps on the Smartphone (2)18 Select a Camera Connect function. zIn iOS, select [Join] when a message is displa

435Connecting to a Smartphone via Wi-Fi zFor how to terminate the Wi-Fi connection, see “Terminating the Wi-Fi Connection” (p.457). zTerminating the W

436Connecting to a Smartphone via Wi-Fi[Bluetooth function] ScreenOn the [Bluetooth function] screen, you can change or check the Bluetooth function s

437Connecting to a Smartphone via Wi-FiStay conn. if o zSelecting [Enable] lets you view images on the camera and control it in other ways by connect

438Connecting to a Smartphone via Wi-FiEstablishing a Wi-Fi Connection When the Camera Is O1 Start Camera Connect. zStart Camera Connect on a smartph

439Connecting to a Smartphone via Wi-FiRemoving a Paired Device’s RegistrationTo pair the camera with a dierent smartphone, clear the paired device’s

44Inserting and Removing the CardThe captured images are recorded onto the card.Make sure the card’s write-protect switch (1) is set upward to enable

440Connecting to a Smartphone via Wi-FiConnecting to a Smartphone via Wi-Fi from the [Wi-Fi function] MenuSteps on the Camera (1)1 Set Wi-Fi settings

441Connecting to a Smartphone via Wi-Fi6 Select an item. zIf Camera Connect is already installed, select [Do not display]. zIf Camera Connect is not i

442Connecting to a Smartphone via Wi-FiSteps on the SmartphoneSmartphone’s screen (sample)8 Operate the smartphone to establish a Wi-Fi connection. zA

443Connecting to a Smartphone via Wi-Fi gThe main window of Camera Connect will be displayed on the smartphone.The Wi-Fi connection to a smartphone is

444Connecting to a Smartphone via Wi-FiOperating the Camera Using a SmartphoneThe main functions of Camera Connect are described below.Images on camer

445Connecting to a Smartphone via Wi-Fi oIf the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur.

446Connecting to a Smartphone via Wi-FiSending Images to a Smartphone Automatically as You ShootYour shots can be sent automatically. Before following

447Connecting to a Smartphone via Wi-Fi5 Set [Size to send]. zSelect the image size, then press <0>.6 Take the picture.

448Connecting to a Smartphone via Wi-FiSending Images to a Smartphone from the CameraYou can use the camera to send images to a smartphone paired via

449Connecting to a Smartphone via Wi-Fi(2) Sending Images from the Quick Control Screen During Playback1 Play back the image.2 Press the <Q> but

45Inserting and Removing the CardRemoval(1)1 Open the cover. zSet the power switch to <2>. zCheck that the access lamp (1) is o, then open the

450Connecting to a Smartphone via Wi-Fi(3) Selecting Sending Options and Sending the ImagesSending Images Individually1 Select an image to send. zPres

451Connecting to a Smartphone via Wi-FiSending Multiple Selected Images1 Press <0>.2 Select [Send selected].3 Select images to send. zPress the

452Connecting to a Smartphone via Wi-Fi4 Exit image selection. zSelect [OK].5 Select [Size to send]. zSet it as necessary. zOn the displayed screen, s

453Connecting to a Smartphone via Wi-Fi3 Specify the range of images. zSelect the rst image (start point), then press <0>. zSelect the last ima

454Connecting to a Smartphone via Wi-FiSending All Images on the Card1 Press <0>.2 Select [Send all card].3 Select [Size to send]. zOn the displ

455Connecting to a Smartphone via Wi-FiSending Images that Match the Search ConditionsSend all the images that match the search conditions set in [Set

456Connecting to a Smartphone via Wi-FiEnding Image TransferSending Images from the Camera When Paired via Bluetooth (Android) zPress the <M> bu

457Connecting to a Smartphone via Wi-Fi oDuring the image transfer operation, a picture cannot be taken even if the camera’s shutter button is pressed

458Connecting to a Smartphone via Wi-FiSpecifying Viewable ImagesYou can specify images viewable on a smartphone by operating the camera. Images can b

459Connecting to a Smartphone via Wi-Fi5 Select [Viewable imgs].6 Select an item. zSelect [OK] to access the setting screen.[All images]All images sto

46Inserting and Removing the Card oWhen the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from t

460Connecting to a Smartphone via Wi-Fi[Select by rating]Specify viewable images depending on whether a rating is appended (or not appended) or by the

461Connecting to a Computer via Wi-FiThis section describes how to connect the camera to a computer via Wi-Fi and perform camera operations using EOS

462Connecting to a Computer via Wi-Fi5 Select [Register a device for connection].(1)(2)6 Check the SSID (network name) and password. zCheck the SSID (

463Connecting to a Computer via Wi-FiSteps on the Camera (2)8 Select [OK]. gThe following message is displayed. “******” represents the last six digit

464Connecting to a Computer via Wi-FiSteps on the Camera (2)12 Establish a Wi-Fi connection. zSelect [OK].[DWi-Fi on] ScreenDisconnect,exit zTerminate

465Connecting to a Computer via Wi-Fi oIf the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur.•

466Connecting to a Computer via Wi-FiSending Images to a Computer AutomaticallyWith the dedicated software Image Transfer Utility 2, you can send imag

467Connecting to a Computer via Wi-Fi4 Select [OK].5 Connect to an access point via Wi-Fi. zEstablish a Wi-Fi connection between the camera and the ac

468Connecting to a Computer via Wi-FiSending Images on the Camera to a Computer Automatically1 On the [Wi-Fi settings] screen, select [Auto send image

469Connecting to a Printer via Wi-FiThis section describes how to print images by directly connecting the camera to a printer via Wi-Fi. For printer o

47Using the ScreenYou can change the direction and angle of the screen.1 Flip out the screen.175°180°90°2 Rotate the screen. zWhen the screen is swung

470Connecting to a Printer via Wi-Fi(1)(2)6 Check the SSID (network name) and password. zCheck the SSID (1) and password (2) displayed on the camera s

471Connecting to a Printer via Wi-FiWi-Fi connection is possible with Wi-Fi printers supporting PictBridge (Wireless LAN).To establish a Wi-Fi connect

472Connecting to a Printer via Wi-FiPrinting ImagesPrinting Images Individually1 Select the image to be printed. zPress the <Y> <Z> keys o

473Connecting to a Printer via Wi-FiPrinting by Specifying the Options1 Press <0>.2 Select [Print order].3 Set the printing options. zFor the se

474Connecting to a Printer via Wi-Fi6 Print the image. zWhen [OK] is selected, printing starts. oWith a Wi-Fi connection to a printer established, a p

475Connecting to a Printer via Wi-FiPrint SettingsThe screen display and setting options vary depending on the printer. Also, certain settings may not

476Connecting to a Printer via Wi-Fi[Q] Setting the Paper Size zSelect the size of the paper in the printer.[Y] Setting the Paper Type zSelect the typ

477Connecting to a Printer via Wi-FiSetting the Date/File Number Imprinting zSelect [I]. zSelect what to print.Setting the Printing Eects (Image Opti

478Connecting to a Printer via Wi-FiSetting the Number of Copies zSelect [R]. zSelect the number of copies to print.The [Default] setting for printing

479Connecting to a Printer via Wi-FiCropping the ImageSet cropping immediately before printing. Changing other print settings after you crop images ma

48Turning on the Power z<1>Turns the camera on, accompanied by the sound of the shutter curtain opening. Also accompanied by the sound of the ap

480Connecting to a Printer via Wi-Fi oDepending on the printer, the cropped image area may not be printed as you specied. oThe smaller you make the c

481Sending Images to a Web ServiceThis section describes how to use Web services to send images.Registering Web ServicesUse a smartphone or computer t

482Sending Images to a Web ServiceRegistering CANON iMAGE GATEWAYLink the camera and CANON iMAGE GATEWAY by adding CANON iMAGE GATEWAY as a destinatio

483Sending Images to a Web Service6 Establish a Wi-Fi connection. zGo to step 7 on page 498 (PBC mode), step 7 on page 502 (PIN mode), or step 7 on pa

484Sending Images to a Web ServiceSteps on the Computer or Smartphone10 Set up camera web link. zAccess the page in the notication message. zFollow t

485Sending Images to a Web ServiceRegistering Other Web ServicesSteps on the Computer or Smartphone1 Congure the Web service you want to use. zVisit

486Sending Images to a Web ServiceEstablishing a Wi-Fi Connection1 Select [Wi-Fi function]. zSelect [Wi-Fi function] on the [Wireless communication se

487Sending Images to a Web ServiceSending Images to a Web ServiceYou can share images with your family and friends by sending images from the camera t

488Sending Images to a Web ServiceSending Multiple Selected Images1 Press <0>.2 Select [Send selected].3 Select the images to send. zPress the &

489Sending Images to a Web Service4 Select [Size to send]. zWhen YouTube is selected as the destination, [Size to send] is not displayed. zOn the disp

49Turning on the Powerz Battery Level IndicatorWhen the power switch is set to <1>, the battery level will be indicated in one of six levels. A

490Sending Images to a Web ServiceSending a Specied Range of ImagesSpecify the range of images to send all the images in the range at once.1 Press &l

491Sending Images to a Web Service5 Select [Size to send]. zOn the displayed screen, select an image size.6 Select [Send]. zOn the screen after images

492Sending Images to a Web Service3 Select [Size to send]. zSet it as necessary. zOn the displayed screen, select an image size.4 Select [Send]. zOn t

493Sending Images to a Web ServiceSending Images that Match the Search ConditionsSend all the images that match the search conditions set in [Set imag

494Sending Images to a Web Service4 Select [Send]. zOn the screen after images are sent, select [OK] to end the Wi-Fi connection. zWhen the [Terms of

495Sending Images to a Web Service oWith a Wi-Fi connection to a Web service established, a picture cannot be taken even if the camera’s shutter butto

496Wi-Fi Connection via Access PointsThis section describes how to join a Wi-Fi network via an access point.Checking the Type of Access PointDetermine

497Wi-Fi Connection via Access PointsEstablishing a Wi-Fi Connection with WPS (PBC Mode)First, check the position of the WPS button and how long to pr

498Wi-Fi Connection via Access Points5 Select [Register a device for connection]. zWhen [q] (Connect to smartphone) is selected, the screen on the lef

499Wi-Fi Connection via Access Points8 Select [WPS (PBC mode)]. zSelect [OK].9 Connect to the access point via Wi-Fi. zPress the access point’s WPS bu

5Chapters ContentsIndex to Features IndexChapters ContentsIndex to Features IndexInstruction ManualsDownloading the Advanced User Guide/Instruction Ma

50Attaching and Detaching a LensAttaching a Lens1 Remove the caps. zRemove the rear lens cap and the body cap by turning them as shown by the arrows.2

500Wi-Fi Connection via Access Points[qConnect to smartphone]Go to step 9 on page 442.[DRemote control (EOS Utility)]Go to step 8 on page 463.[lPrint

501Wi-Fi Connection via Access PointsEstablishing a Wi-Fi Connection with WPS (PIN Mode)First, check how to enter a PIN code on the access point.It ma

502Wi-Fi Connection via Access Points zWhen [q] (Connect to smartphone) is selected, the screen on the left is displayed. If Camera Connect is already

503Wi-Fi Connection via Access Points9 Specify the PIN code at the access point. zAt the access point, specify the PIN code displayed on the camera sc

504Wi-Fi Connection via Access PointsEstablishing a Wi-Fi Connection ManuallyEstablish a Wi-Fi connection by selecting the SSID (or ESS-ID) of the acc

505Wi-Fi Connection via Access Points6 Select [Switch network]. zDisplayed when [q], [D], or [l] is selected.(3)(2)(1)7 Select the access point. zPres

506Wi-Fi Connection via Access PointsEntering the Access Point Password zEnter the password specied for the access point. For details on the specied

507Wi-Fi Connection via Access PointsSetting the IP Address10 Select [Auto setting]. zSelect [OK] to access the setting screen for the Wi-Fi function.

508Wi-Fi Connection via Access PointsSend To ScreenA screen to select a destination may be displayed depending on the Web service.To register destinat

509Reconnecting via Wi-FiFollow these steps to reconnect to devices or Web services with registered connection settings.1 Select [Wi-Fi function]. zSe

51Attaching and Detaching a LensDetaching the LensWhile pressing the lens release button, turn the lens as shown by the arrow. zTurn the lens until it

510Reconnecting via Wi-Fi[D] Computer zOn the computer, start the EOS software. zIf the computer’s connection destination has been changed, restore th

511Reconnecting via Wi-FiConnecting to a Bluetooth-connected Smartphone via Wi-Fi1 Start Camera Connect. zTap on the Camera Connect icon on the smartp

512Reconnecting via Wi-FiRegistering Multiple Connection SettingsYou can register up to 20 connection settings for the Wi-Fi function.1 Select [Wi-Fi

513Changing or Deleting Connection SettingsChange or delete connection settings saved on the camera. To change or delete the connection settings, term

514Changing or Deleting Connection Settings5 Check or change the connection settings. zSelect an item, then change or delete the connection settings o

515Clearing Wireless Communication Settings to DefaultAll wireless communication settings can be deleted. By deleting the wireless communication setti

516View Info ScreenOn the [View info] screen, you can check error details and the camera’s MAC address.1 Select [Wi-Fi function]. zSelect [Wi-Fi funct

517Responding to Error MessagesWhen an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the ca

518Responding to Error Messages11: Connection target not found zIn the case of [q], is Camera Connect running? gEstablish a connection using Camera Co

519Responding to Error Messages21: No address assigned by DHCP serverWhat to check on the camera zOn the camera, IP address is set to [Auto setting].

52Attaching and Detaching EF/EF-S LensesAll EF and EF-S lenses can be used by attaching the optional Mount Adapter EF-EOS R. The camera cannot be used

520Responding to Error Messages22: No response from DNS serverWhat to check on the camera zOn the camera, does the DNS server’s IP address setting mat

521Responding to Error Messages23: Device with same IP address exists on selected networkWhat to check on the camera zDo the camera and another device

522Responding to Error Messages61: Selected SSID wireless LAN network not found zAre any obstacles blocking the line of sight between the camera and t

523Responding to Error Messages63: Wireless LAN authentication failed zAre the camera and the access point set to use the same authentication method?

524Responding to Error Messages65: Wireless LAN connection lost zAre any obstacles blocking the line of sight between the camera and the antenna of th

525Responding to Error Messages68: Cannot connect to wireless LAN terminal. Retry from the beginning. zDid you hold down the access point’s WPS (Wi-Fi

526Responding to Error Messages125: Check the network settings zIs the network connected? gCheck the connection status of the network.126: Could not c

527Responding to Error Messages151: Transmission canceled zAutomatic image transfer to the computer was somehow interrupted. gTo resume automatic ima

528Wireless Communication Function NotesIf the transmission rate drops, the connection is lost, or other problems occur when using the wireless commun

529Wireless Communication Function NotesCautions for Using Multiple Cameras zWhen connecting multiple cameras to one access point via Wi-Fi, make sure

53Attaching and Detaching EF/EF-S Lenses4 Set the lens’s focus mode switch to <AF>. z<AF> stands for autofocus. z<MF> stands for man

530SecurityIf security settings have not been properly set, the following problems may occur. zTransmission monitoringThird parties with malicious int

531Checking Network Settings zWindowsOpen the Windows [Command Prompt], then type ipcong/all and press the <Enter> key.In addition to the IP ad

532[Wireless communication settings] ScreenOn the [Wireless communication settings] screen, you can change the wireless communication function setting

533[Wi-Fi settings] ScreenWi-Fi zYou can set whether to [Enable] or [Disable] the wireless communication function. zWhen the use of electronic devices

534Virtual Keyboard Operation(1) (2)(3)(4)(5) (7) (8) (9)(6)(1) Input area, for entering text(2) Cursor keys, for moving in the input area(3) Curre

535Setting the IP Address ManuallySet up the IP address settings manually. The items displayed vary depending on the Wi-Fi function.1 Select [Manual s

536Setting the IP Address Manually4 Select [OK]. zWhen you have completed setting the necessary items, select [OK]. zIf you are not sure what to enter

537Wi-Fi/Bluetooth Status DisplayWireless communication status can be checked on the camera screen and LCD panel.(3)(3)(1)(1)(2)(2)(1) Wi-Fi function

538Wi-Fi/Bluetooth Status DisplayBluetooth Function IndicatorBluetooth functionConnection statusScreen LCD PanelOther than [Disable]Bluetooth connecte

5395397Custom Functions / My MenuYou can ne-tune camera functions and change the functionality of buttons and dials to suit your shooting preferences

54Using the ViewfinderLook through the viewnder to activate it. You can also restrict display to either the screen or viewnder (p.403).Adjusting the

540Tab Menus: Customization zC.Fn1p.542p.542p.543p.543p.544p.545p.546 zC.Fn2p.547p.547p.548 zC.Fn3p.548p.548p.549p.549

541Tab Menus: Customization zC.Fn4p.555p.555p.561p.555 zC.Fn5p.550p.551p.551p.552p.553 zC.Fn6p.554

542Custom Function SettingsNYou can customize camera features on the [8] tab to suit your shooting preferences. Any settings you change from default v

543Custom Function SettingsBracketing auto cancelSpecify whether AEB and white balance bracketing settings are canceled when you set the power switch

544Custom Function SettingsNumber of bracketed shotsThe number of shots taken with AEB and white balance bracketing can be changed from the default of

545Custom Function SettingsSafety shiftIf the subject brightness changes and the standard exposure cannot be obtained within the autoexposure range, t

546Custom Function SettingsSame exposure for new apertureMaximum aperture may decrease (the lowest f/number may increase) in [a] mode (manual exposure

547Custom Function SettingsC.Fn2Set shutter speed rangeYou can set the shutter speed range. In [t], [s] and [a] mode, you can set the shutter speed ma

548Custom Function SettingsAE lock metering mode after focusFor each metering mode, you can set whether to lock the exposure (AE lock) after achieving

549Custom Function SettingsFocus ring rotationRF lens focusing ring turning direction can be reversed.[] Normal[] Reverse directionRF lens MF focus ri

55Basic OperationsHolding the Camera zViewing the Screen as You ShootAs you shoot, you can tilt the screen to adjust it. For details, see page 47.High

550Custom Function SettingsC.Fn5Add cropping informationAdding cropping information displays vertical lines for your specied aspect ratio, so that yo

551Custom Function SettingsDefault Erase optionYou can set the default option in the erase menu (p.335) accessed by pressing the <L> button duri

552Custom Function SettingsRetract lens on power oThis is to set the lens retraction mechanism for when a gear-driven STM lens (such as EF40mm f/2.8

553Custom Function SettingsAdd IPTC informationRegistering IPTC (International Press Telecommunications Council) information to the camera from EOS Ut

554Custom Function SettingsC.Fn6Clear all Custom Functions (C.Fn)Selecting [86: Clear all Custom Func. (C.Fn)] clears all Custom Function settings.Cus

555Customizing OperationsNYou can assign frequently used functions to camera buttons or dials according to your preferences for easy operations.1 Sele

556Customizing OperationsFunctions Available for ButtonsFunctionLAFMetering and AF startk k k kAF stopk k kAE lock, AF stopk k kAF point selectionk k

557Customizing Operationsk k k kk k k kk k k kk k k k k k k k k kk k k kk k k k k k k k k kk k k k k k k k k kk k k k k k k k k kk k k k k k k k k kk

558Customizing OperationsFunctionLPress buttons directlyDial function settingsk k kShort press: LCD illuminationLong press: LCD information switchingk

559Customizing Operationsk k k k k k k k k kk k k kk k k kk k k kk k k k kk k k k k k k k k kk k k k k k k k k kk k k k k k k k k kk k k k k k k k k k

56Basic OperationsShutter ButtonThe shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter but

560Customizing OperationsFunctions Available for DialsFunction6 5TShutter speed setting in M modek kAperture setting in M modek kSet ISO speed (5durin

561Customizing OperationsCustomizing the M-Fn (Multi-Function) Bar1 Select [84: Customize M-Fn bar].2 Select [z] (for use when shooting) or [x] (for u

562Customizing Operations4 Assign functions to swiping <m> or tapping each end. zSelecting [] (swipe), [ ] (tap left end), or [ ] (tap right end

563Customizing Operations zFull Cover SettingWhen [Full cover setting] is enabled, you can access the M-Fn bar customization screen by fully covering

564Customizing OperationsFunctions Available for the M-Fn BarFunction zISO speed ISO speedChange value/selected itemAuto ISO speedCustom ISO speed (**

565Tab Menus: My Menup.566p.569p.569p.570

566Registering My MenuNUnder My Menu tab, you can register menu items and Custom Functions whose settings you change frequently.Creating and Adding My

567Registering My Menu2 Select [Select items to register].3 Register the desired items. zSelect the item to be set, then press <0>. zSelect [OK]

568Registering My Menu zDelete tabYou can delete the current My Menu tab. Select [Delete tab] to delete the [MY MENU*] tab. zRename tabYou can rename

569Registering My MenuDeleting all My Menu tabs / Deleting all itemsYou can delete all the created My Menu tabs or My Menu items registered under them

57Basic Operations<W> Mode ButtonYou can set the shooting mode.Press the <W> button, turn the <6> dial, then select the shooting mod

570Registering My MenuMenu Display SettingsYou can select [Menu display] to set the menu screen that is to appear rst when you press the <M> bu

5715718ReferenceThis chapter provides reference information on camera features.

572Software OverviewYou can download the latest version of EOS software or other dedicated software from the Canon website.Downloading and Installing

573Software Overview(1) Double-click the dmg le. gA drive icon and installer le will appear on the desktop. If the installer le does not appear, do

574Importing Images to a ComputerYou can use EOS software to import images from the camera to a computer. There are two ways to do this.Importing by C

575Importing Images to a ComputerImporting Images with a Card ReaderYou can use a card reader to import images to a computer.1 Install the software (p

576Charging a Battery in the CameraUsing USB Power Adapter PD-E1 (sold separately), you can charge Battery Pack LP-E6N without removing it from the ca

577Charging a Battery in the Camera oIf the access lamp does not light up, try unplugging the USB power adapter and plugging it in again. oThe chargin

578Using a Battery GripFeaturing buttons and dials for vertical shooting, Battery Grip BG-E22 (sold separately) is an EOS R accessory that can power t

579Using a Battery Grip2 Remove the battery compartment cover. zTurn the camera o and remove the cover. zWith the cover o, remove the battery (p.43)

58Basic Operations<6> Main Dial(1) After pressing a button, turn the <6> dial.Press a button such as <W> or <B>, then turn the

580Using a Battery Grip4 Remove the battery magazine. oWhen reattaching the battery compartment cover to the camera, attach it opened to at least 90°.

581Using a Battery GripAttaching Batteries1 Attach the batteries. zInsert the batteries as shown. zWhen only one battery is used, it can be inserted i

582Using a Battery Grip oWhen attaching batteries, make sure the electrical contacts are clean. Wipe o any dirt on the contacts with a soft cloth. oA

583Using a Battery Grip2 Attach the battery magazine. zGuide the end of the cord out of the cord hole.3 Connect the DC coupler to the AC adapter. zSec

584Using a Battery GripButton and Dial Operations zTo use the buttons and dials, turn the vertical-grip operation switch (4) to ON. zThe buttons and d

585Using a Battery GripUsing a Flash with a PC Sync Cord zThe PC terminal enables you to use ash units with a PC sync cord. zThe PC sync cord can be

586Using a Battery GripCharging Batteries in the Battery GripUsing USB Power Adapter PD-E1, you can charge LP-E6N batteries without removing them from

587Using a Battery Grip oTo protect batteries and keep them in optimal condition, do not charge continuously for more than 24 hours. oIn case of charg

588Troubleshooting GuideIf a problem occurs with the camera, rst refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve

589Troubleshooting GuideBatteries cannot be charged with the USB power adapter (sold separately). ●Batteries are not charged while the camera’s power

59Basic Operations<5> Quick Control Dial(1) After pressing a button, turn the <5> dial.Press a button such as <W> or <B>, then

590Troubleshooting GuideThe access lamp still lights or blinks even when the power switch is <2>. ●If the power is turned o while an image is

591Troubleshooting GuideShooting-Related ProblemsThe lens cannot be attached. ●To attach EF or EF-S lenses, you will need a mount adapter. The camera

592Troubleshooting GuideThe image is out of focus or blurred. ●Set the lens’s focus mode switch to <AF> (p.50, 53). ●Press the shutter button ge

593Troubleshooting GuideThe maximum burst during continuous shooting is lower. ●If you shoot a subject that has ne detail such as a eld of grass, th

594Troubleshooting GuideISO 100 cannot be set. ISO speed expansion cannot be selected. ●Check the [ISO speed range] setting under [z3: zISO speed sett

595Troubleshooting GuideUsing ash in [f] or [d] mode lowers the shutter speed. ●Under [z2: External Speedlite control], set [Slow synchro] to [1/200-

596Troubleshooting GuideHigh-speed sync is not available in [f] or [d] mode. ●Under [z2: External Speedlite control], set [Slow synchro] to [1/200-30s

597Troubleshooting GuideMovie shooting stops by itself. ●If the card’s writing speed is slow, movie shooting may stop automatically. For cards that ca

598Troubleshooting GuideThe exposure changes during movie shooting. ●If you change the shutter speed or aperture during movie shooting, the changes in

599Troubleshooting GuideProblems with Wireless FeaturesWi-Fi function cannot be set. ●If the camera is connected to a computer or another device with

6Chapters ContentsIndex to Features IndexChapters ContentsIndex to Features IndexQuick Start Guide1Insert the battery (p.43). zUpon purchase, charge

60Basic Operations<R> Multi-Function Lock ButtonBy setting [56: Multi function lock] and pressing the <R> button, you can prevent settings

600Troubleshooting GuideCannot pair with a smartphone. ●A previously paired smartphone cannot be paired with the camera again if the camera’s registra

601Troubleshooting GuideDisplay ProblemsThe menu screen shows fewer tabs and items. ●In [A] mode, some tabs and items are not displayed. Tabs and item

602Troubleshooting GuideThe shooting date and time displayed are incorrect. ●Make sure the correct date and time are set (p.380). ●Check the time zone

603Troubleshooting GuidePlayback ProblemsPart of the image blinks in black. ●[33: Highlight alert] is set to [Enable] (p.309).A red box is displayed o

604Troubleshooting GuideOperation sound and mechanical sound can be heard during movie playback. ●If you operate the camera’s dials or lens during mov

605Troubleshooting GuideMy card reader does not recognize the card. ●Depending on the card reader used and the computer’s operating system, SDXC cards

606Troubleshooting GuideSensor Cleaning ProblemsThe shutter makes a sound during sensor cleaning. ●Under [53: Sensor cleaning], when you select [Clean

607Error Codes(2)(1)If there is a problem with the camera, an error message will appear. Follow the on-screen instructions.(1) Error number(2) Cause

608Performance DataStill Photo Shooting zNumber of Possible ShotsTemperatureRoom Temperature (23°C / 73°F)Low Temperature (0°C / 32°F)Possible shots A

609Performance Data zGuide to Image Quality Settings (Approx.)Image QualityPixels RecordedFile Size (MB)Possible ShotsMaximum BurstStandardHigh SpeedJ

61Basic Operations<m> M-Fn (Multi-Function) BarMYou can assign commonly used functions to swiping the <m> bar and tapping each end. By def

610Performance Data zPixel Count When Still Photo Cropping/Aspect Ratio is Set (Approx. pixels)Image QualityFull-frame (3:2) 1.6x (crop)3/1/F6720x448

611Performance DataMovie Shooting zCards that Can Record MoviesMovie Recording Quality SD CardH 65B4WUHS-II, Video Speed Class 60 or higherXUHS-I, UHS

612Performance Data zTotal Movie Recording Time and File Size Per Minute (Approx.)Movie Recording QualityTotal Possible Recording Time on CardFile siz

613Performance Data zTotal Possible Time for Time-lapse Movie Shooting (Approx.)Time-lapse Movie Shooting Room Temperature (23°C / 73°F)Low Temperatu

614Performance DataISO Speed in Movie ShootingIn [y] Mode zFor HD/Full HD and High Frame Rate movies, ISO speed is automatically set in a range of ISO

615Performance DataIn [M] Mode zFor HD/Full HD and High Frame Rate movies with ISO speed set to [AUTO], it is automatically set in a range of ISO 100–

616Performance DataImage Playback zResize Options by Original Image QualityOriginal Image QualityAvailable Resize Settings4a b3*k k k4k kak* Only b i

617Information DisplayLCD PanelStill photo/movie standby screen 1(3)(4)(6)(5)(9)(8)(7)(10)(11)(12)(13)(2)(1)(1) Multi-function lock(2) Shooting mode

618Information DisplayMovie standby screen 2(2)(3)(4)(5)(6)(7)(1)(1) AF method(2) Movie digital IS(3) Image size(4) White balance(5) Canon Log(6)

619Information DisplayStill Photo Shooting ScreenEach time you press the <B> button, the information display will change. zViewnder display pos

62Basic OperationsINFO ButtonEach press of the <B> button changes the information shown.The following sample screens are for still photos.

620Information Display(33)(32)(35)(34)(36)(37)(38)(39)(40)(41)(24)(25)(26)(27)(28)(29)(30)(31)(24) Flash ready/Flash o/FE lock/High-speed sync(25)

621Information DisplayMovie Shooting ScreenEach time you press the <B> button, the information display will change. zViewnder display positions

622Information Display(30)(29)(31)(32)(33)(34)(25)(26)(27)(28)(23)(22)(24)(22) Sound-recording level indicator (manual)(23) Canon Log(24) AE lock(2

623Information DisplayScene IconsIn [A] or [y] shooting mode, the camera detects the type of scene, and all settings are congured accordingly. The de

624Information Display*4: The icon of the scene selected from the detectable scenes will be displayed.*5: Displayed when all the following condition

625Information DisplayPlayback Screen zBasic information display for still photos(1) (8)(14)(13)(12)(11)(10)(9)(15)(3)(4)(5)(6)(7)(2)(1) Wi-Fi functi

626Information Display zDetailed information display for still photos(1)(8)(13)(12)(11)(10)(9)(15)(14)(16)(17)(3)(4)(5)(6)(7)(2)(1) Aperture(2) Shut

627Information Display zDetailed information display for movies(1)(2)(7)(6)(8)(3)(4)(5)(1) Movie playback(2) Picture Style: Settings Canon Log: Char

628Trademarks oAdobe is a trademark of Adobe Systems Incorporated. oMicrosoft and Windows are trademarks or registered trademarks of Microsoft Corpora

629About MPEG-4 Licensing“This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video

63Menu Operations and Settings(1)(7)(5)(3)(2)(4)(6)(1) <M> button(2) <B> button(3) Screen(4) <V> cross keys(5) <0> button

630Use of Genuine Canon Accessories Is RecommendedThis product is designed to achieve optimum performance when used with genuine Canon accessories. Th

631Only for European Union and EEA (Norway, Iceland and Liechtenstein)These symbols indicate that this product is not to be disposed of with your hous

632CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.

633Numeric[4K] 3840x2160 (Movie) ... 192[4K] 3840x2160 (Time-lapse movie) ... 225[A+] (Scene Intelligent Aut

634IndexAutofocus 9 AFAuto Lighting Optimizer ... 104Auto power o ... 377Auto reset ...

635IndexCustom shooting mode... 417Custom white balance ... 100DD+ ...

636IndexFile size ... 200, 609, 612Filter eect (Monochrome) ... 94Fine Detail ...

637IndexHigh dynamic range 9 HDRHigh Frame Rate ... 199High ISO speed noise reduction ... 105Highlight alert...

638IndexJump display...311LLandscape ... 89Language...

639IndexCanon Log ... 236Cards suited for movie shooting ... 611Compression method ... 195Crop

64Menu Operations and SettingsScreen in [t], [d], [s], [f], [a], and [BULB] Modes(2)(3)(10)(4) (5) (6) (7) (8)(9)(1)(1) Main tabs(2) Secondary tabs(

640IndexPPAL ... 195, 384Partial metering ... 152Part names ...

641IndexScene Intelligent Auto ... 123Screen ... 30, 47Adjusting angle ...

642IndexTilt correction ... 347Time code ... 205Time-lapse movie ...

643IndexManual setting ... 535MAC address ... 496, 516Network ... 441, 462, 47

CEL-SX5DA210 © CANON INC. 2018CANON INC.30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, JapanEurope, Africa & Middle EastCANON EUROPA N.V.Bove

65Menu Operations and Settings3 Select an item. zTurn the <5> dial to select an item, then press <0>.4 Select an option. zTurn the <5&g

66Menu Operations and SettingsDimmed Menu ItemsExample: Highlight tone priorityDimmed menu items cannot be set. The menu item is dimmed if another fun

67d Touch-Screen OperationYou can operate the camera by tapping or dragging on the screen (touch-screen panel) with your nger.TapSample screen (Quick

68Q Quick ControlYou can directly select and set the settings displayed on the screen. This is called Quick Control.1 Press the <Q> button (7).2

69692ShootingThis chapter describes shooting and introduces menu settings on the shooting ([z]) tab. zA M icon to the right of a page title indicates

7Chapters ContentsIndex to Features IndexChapters ContentsIndex to Features IndexQuick Start Guide6Set the shooting mode to [A] (p.123). zPress the

7070-1 Shooting Still Photos[Shooting Mode] Settings for Still PhotosTo prepare for still photo shooting, press the <W> button, then press the &

71Tab Menus: Still Photo Shooting zShooting 1p.75p.78p.80p.118p.118 zShooting 2p.110p.179 zShooting 3p.155p.85p.104p.109p.119p.120

72Tab Menus: Still Photo Shooting zShooting 4p.97p.100p.102p.117p.88, 92, 95 zShooting 5p.107p.105p.121p.130p.166p.161 zShooting 6p.159p.115p.151p.150

73Tab Menus: Still Photo ShootingIn [A] mode, the following screen is displayed. zShooting 1p.75p.78p.118p.118p.130p.192

74Index to Features: Still Photo ShootingShooting Modes z[A] mode B p.123 z[t] mode B p.140 z[d] mode B p.132 z[s] mode B p.134 z[f] mode B p.136 z[a]

75Setting Image QualityYou can select the pixel count and the image quality. JPEG image quality options include 73, 83, 74, 84, 7a, 8a, and b. RAW ima

76Setting Image QualityRAW ImagesA RAW image is raw data output by the image sensor converted to digital data. It is recorded to the card as is, and y

77Setting Image QualityGuidelines for Choosing Image QualityFor guidelines on le sizes, number of possible shots, and maximum burst shots, see page 6

78Setting Up Dual Pixel RAW ShootingShooting 1 or F images with this feature enabled produces special, Dual Pixel RAW images containing dual pixel inf

79Setting Up Dual Pixel RAW Shooting4 Take the picture. gA RAW image containing Dual Pixel data (Dual Pixel RAW image) is captured. oStartup takes lon

8Chapters ContentsIndex to Features IndexChapters ContentsIndex to Features IndexAbout This ManualChapter OrganizationChapters 2–7 correspond to the f

80Setting Cropping/Aspect RatioNNormally with RF or EF lenses, images are captured at the sensor size of approx. 36.0 x 24.0 mm in full-frame shooting

81Setting Cropping/Aspect RatioSetting examplesY setU set or EF-S lens used4 Take the picture. zWhen [1.6x (crop)] is set or an EF-S lens is used, an

82Setting Cropping/Aspect Ratio oAreas outside the cropped area are not recorded in RAW shooting when [1.6x (crop)] is set, or with EF-S lenses. o[Sho

83i: Setting the ISO Speed for Still PhotosNSet the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In [A] mode, ISO

84Setting the ISO Speed for Still PhotosISO Speed Guide zLow ISO speeds reduce image noise but may increase the risk of camera/subject shake or reduce

85Setting the ISO Speed for Still PhotosSetting the Manually-Settable ISO Speed RangeYou can set the manually-settable ISO speed range (minimum and ma

86Setting the ISO Speed for Still PhotosSetting the ISO Speed Range for ISO AutoYou can set the automatic ISO speed range for ISO Auto within ISO 100–

87Setting the ISO Speed for Still PhotosSetting the Minimum Shutter Speed for ISO AutoYou can set the minimum shutter speed so that the shutter speed

88Selecting a Picture StyleNJust by selecting a preset Picture Style, you can obtain image characteristics eectively matching your photographic expre

89Selecting a Picture StylePicture Style Characteristics z[D] AutoThe color tone will be adjusted automatically to suit the scene. The colors will lo

9Chapters ContentsIndex to Features IndexChapters ContentsIndex to Features IndexAbout This ManualBasic Assumptions for Operational Instructions, Samp

90Selecting a Picture Style z[U] FaithfulSuited for processing the image with a computer. The color of a subject that is captured in sunlight at a col

91Selecting a Picture StyleSymbols The Picture Style selection screen has icons for [Strength], [Fineness], or [Threshold] for [Sharpness] as well as

92Customizing a Picture StyleNYou can customize the Picture Styles. You can adjust Picture Style settings such as [Contrast] or [Sharpness] ([Strength

93Customizing a Picture Style4 Adjust the item. zAdjust the eect level, then press <0>. zPress the <M> button to save the adjusted settin

94Customizing a Picture Style[V] Monochrome AdjustmentBesides the eects described on the preceding page such as [Contrast], or [Strength], [Fineness]

95Registering a Picture StyleNYou can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User

96Registering a Picture Style5 Select an item. zSelect an item (such as [Strength] in [Sharpness]), then press <0>.6 Adjust the item. zAdjust th

97B: Setting the White BalanceNWhite balance (WB) is for making the white areas look white. Normally, the Auto [Q] (Ambience priority) or [Qw] (White

98Setting the White Balance(Approx.)Display Mode Color Temperature (K: Kelvin)QAuto (Ambience priority, p.99)3000–7000Qw Auto (White priority, p.99)WD

99Setting the White Balance[Q] Auto White Balance With [Q] (Ambience priority), you can slightly increase the intensity of the image’s warm color cast