Canon PowerShot S80 User Guide Advanced Manual de usuario descargar pdf (Pagina 55)

Photobooth Shooting 55

width=1000, height=800: images resized to 1067 pixels wide by 800 pixels high and then cropped by

equal amount left and right to give a final image size of 1000x800

width=0, height=800: images resized to 1067 pixels wide by 800 pixels high (the app calculates the

width as 800*1600/1200)

Each image can also be rotated clockwise by between 0 and 359.9 degrees.

The settings in the screen shot above show how a simple layout of two strips of four images printed on

6"x4" paper using a 300 dpi printer can be defined.

The page size in pixels can be displayed by first setting up the printer to the required page size and

resolution and then pressing the "Print Info..." button. The layout can be previewed on computer

screen by pressing the "Preview" button or printed by pressing the "Print Test Page" button. Hold the

"Shift" key down and click on the "Print Test Page" button to print a printer calibration image with index

marks showing the extent of the printable area.

The "Preset layouts..." button can be used to help design a number of different popular layouts using

four photos. These include a double strip of four, a single strip of four, one large image with a row of

three smaller images below and two rows of two images. Simply select the layout you want, adjust the

page margins and image spacing and then press the OK button and the software will work out the

settings for you.

When the custom layout option is used the number of rows and columns, image border, rotate and

crop settings in the main photobooth settings dialog are not applicable and are grayed out.

Please note: The custom layout functionality was revised in PSRemote v1.9 and custom layout

designs from previous releases may need to be updated if they use the "Copy left half of page to right

to create a double strip" option.

Other output options

The images can be sharpened by selecting the "Sharpen images" checkbox and specifying a

sharpening amount in the the range 0 to 100. The amount of sharpening required depends on

personal taste, the camera and the printer. A value of around 75 is a good staring point.

Photos can be printed in color, pure black and white or toned black and white by selecting the

appropriate option from the dropdown list headed "Print photos:". You can also switch between these

options when the software is running in fullscreen photobooth mode by using the following keyboard

shortcuts: Ctrl+C to select color, Ctrl+B to select black and white, Ctrl+T to select toning, Ctrl+W to

toggle between color and B&W and W to cycle through color, B&W and toning.

When the "toned" option is selected the hue and saturation settings can be adjusted when the software

is running in fullscreen photobooth mode by using the following keyboard shortcuts: Ctrl+cursor left/

Ctrl+right to adjust the hue and Ctrl+cursor up/Ctrl+down to adjust the saturation. A status message

showing the current settings is briefly displayed in the bottom right hand corner of the display when

adjusting the hue and saturation in fullscreen photobooth mode. Setting the B&W toning hue to 200

and the saturation to 40 is a good starting point for sepia toned prints.

If the "Crop image if required to fit the printable area" checkbox is selected the image will be cropped

to fill the printable area within the grid. e.g. if the printable area within the grid is square equal portions

of the left and right of the image will be cropped to make it square.

Captions

Up to 8 captions can be added by selecting the "Edit captions..." button:

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 105 106

Comentarios a estos manuales

Sin comentarios

Canon PowerShot S80 User Guide Advanced Manual de usuario Pagina 55

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras Bridge Canon PowerShot S80 User Guide Advanced