Canon iPF750 Guía básica descargar pdf (Pagina 26)

When printing on special paper, or if printing is not improved after Auto(Advanced) , try Manual .•

(→"Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.)," User Manual)

Use Auto(Standard) if you have switched to another type of paper or if you want the boundaries between colors to

appear as clear as possible.

•

Use Auto(Advanced) to ﬁ ne-tune the space between nozzles or colors if you have switched the printhead or if

clearer printing is required. We recommend Auto(Advanced) for printing at the highest level of quality.

•

We recommend using the type of paper you use most often for adjustment.•

This function is not available with CAD Tracing Paper , CAD Translucent Matte Film , or CAD Clear Film . If

adjustment is not possible as expected using highly transparent ﬁ lm or similar media, try another type of paper, or

try Manual adjustment. (→"Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.)," User Manual)

•

Always make sure the loaded paper matches the type of paper speciﬁ ed on the printer. Adjustment cannot be

completed correctly unless the loaded paper matches the settings.

•

If printed vertical lines are warped or colors are out of alignment, execute Head Posi. Adj. to adjust the Printhead

alignment.

Use Auto(Standard) or Auto(Advanced) to have the printer print and read a test pattern for automatic printhead

adjustment.

Paper to

Prepare

If Vertical Lines are Warped or Colors

are Misaligned

This section describes how to perform automatic adjustment of the printhead to

straighten lines and colors.

Rolls•

An unused roll at least 10 inches wide

Sheets•

Auto(Standard) : One sheet of unused paper of at least A4/Letter size

Auto(Advanced) : Five sheets of unused paper of at least A4/Letter size (or one sheet when

using A2 or larger)

There are two modes for automatic Printhead adjustment: Auto(Standard) and Auto(Advanced) .

Auto(Standard) will ﬁ x most slight image distortion or color misalignment, but if not, try Auto(Advanced) .

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Sin comentarios

Canon iPF750 Guía básica Pagina 26