Canon imagePROGRAF iPF750 Basic guide No.3 Manual de usuario Pagina 644

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 742
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 643
Ink T anks
Checking Ink T ank Levels
On the Display Screen , you can check how much ink is left in the ink tanks.
T o check remaining Ink T ank levels, access the T ab Selection screen on the Control Panel and press or
to select the Ink tab ( ).
Note
If the T ab Selection screen is not displayed, press the Menu button.
If an error has occurred and the T ab Selection screen cannot be displayed, display Ink Info as follows.
1. Press the OK button to display Printer Info .
2. Press the or button to select Ink Info .
3. Press the OK button.
The remaining ink levels shown on the Display Screen correspond to the inks identied by the Color Label on
the bottom of the Display Screen .
These symbols may be displayed above the ink level: “!” if ink is low , “×” if no ink is left, and “?” if you have
deactivated ink level detection.
The remaining ink level is indicated as shown below .
If the Display Screen indicates to replace the Ink T ank , replace the Ink T ank . If a message is displayed
indicating to check the remaining ink levels, or after tasks that consume a lot of ink such as large-format
printing or head cleaning, check the remaining levels and replace Ink T ank as needed. ( P .623 )
628 Maintenance
Vista de pagina 643
1 2 ... 639 640 641 642 643 644 645 646 647 648 649 ... 741 742

Comentarios a estos manuales

Sin comentarios