Canon imagePROGRAF iPF750 Basic guide No.3 Manual de usuario Pagina 688

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 742
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 687
Problems with the printing quality
The surface of the paper is dirty
Cause Corrective Action
The Paper Retainer is soiled. Clean the Paper Retainer .
( P .647)
In the Control Panel menu, set Roll DryingT ime to
at least 1 min.
( P .49)
Y ou are using a paper that does not dry easily .
When paper that does not dry easily is used for
printing, it may curl during printing and touch the
Output T ray .
In this case, in the Control Panel menu, set Scan
W ait T ime to an option other than Off .
However , note that printing will now take longer .
( P .49)
The back side of the paper is dirty
Cause Corrective Action
The Platen has become dirty after borderless printing
or printing on small paper .
Open the T op Cover and clean the Platen .
( P .647)
Set W idth Detection to On in the Control Panel
menu, and then open the T op Cover and clean the
Platen .
( P .647)
The Platen has become soiled because you have set
W idth Detection to Off in the Control Panel menu.
Open the T op Cover and clean the Platen . After this,
manually advance the roll onto the Platen before
printing.
( P .647)
( P .125)
The Paper Retainer is soiled. Clean the Paper Retainer .
( P .647)
672 T roubleshooting
Vista de pagina 687
1 2 ... 683 684 685 686 687 688 689 690 691 692 693 ... 741 742

Comentarios a estos manuales

Sin comentarios