Canon imagePROGRAF iPF750 Basic guide No.3 Manual de usuario Pagina 650

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 742
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 649
Printheads
Access the menu for Printhead replacement
Caution
When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The
metal parts of the Printhead become hot during printing, and there is a risk of burns from touching
these parts.
Note
Prepare a new Ink T ank when ink levels are low .
Y our hands may become dirty during Printhead replacement. Use the gloves provided with the new
Printhead for replacement.
1. If the roll is not ejected because of the cutting method selected, cut it manually and remove it.
( P .331)
2. Clean inside the T op Cover . ( P .647)
3. On the T ab Selection screen of the Control Panel , press or to select the Settings/Adj.
tab ( ).
Note
If the T ab Selection screen is not displayed, press the Menu button.
4. Press the OK button.
The Set./Adj. Menu is displayed.
5. Press or to select Maintenance , and then press the OK button.
6. Press or to select Replace P .head , and then press the OK button.
Ink is now lled.
After about two minutes, a message is shown on the Display Screen instructing you to open
the T op Cover .
634 Maintenance
Vista de pagina 649
1 2 ... 645 646 647 648 649 650 651 652 653 654 655 ... 741 742

Comentarios a estos manuales

Sin comentarios