Canon imagePROGRAF iPF750 Basic guide No.3 Manual de usuario Pagina 663

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 742
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 662
Cleaning the Printer
Cleaning Inside the T op Cover
Clean inside the T op Cover about once a month to maintain better printing quality and help prevent problems.
Also clean inside the T op Cover in the following situations to ensure optimal operation.
If the printed surface or the underside of paper is dirty after printing
After you have used up a roll
After borderless printing
After printing on small paper
After printing on paper that generates a lot of cutting debris
If you have replaced the roll
After printing on paper that generates a lot of paper dust
After printing on adhesive paper
Important
If the Platen inside the T op Cover becomes dirty , it may soil the underside of paper . W e recommend
cleaning the Platen after borderless printing or printing on small paper .
If the Ejection Guide is dirty , it may soil the edge of the paper when the paper is cut. W e recommend
cleaning the Ejection Guide even if it does not appear dirty , because it may actually be covered with
paper dust.
Printing on adhesive paper may leave adhesive on the Platen , Paper Retainer , or other parts. T o
prevent paper jams, we recommend cleaning inside the T op Cover after printing.
1. Open the T op Cover .
2. If paper dust has accumulated in the V acuum holes (a) on the Platen or in the Borderless Printing
Ink Grooves (b), use the Cleaning Brush (c), provided with the printer , to wipe it away .
Note
If the Cleaning Brush is dirty , rinse it in water .
Maintenance 647
Vista de pagina 662
1 2 ... 658 659 660 661 662 663 664 665 666 667 668 ... 741 742

Comentarios a estos manuales

Sin comentarios