
15
When connecting the transmitter to the camera, always use one of the
interface cables included with the transmitter.
1
Turn off both the transmitter and
camera.
2
Attach the transmitter’s
<a> port cap.
Attach the cap for preventing cable
disconnection.
3
Connect the transmitter and
camera.
For the interface cable, use either
IFC-40AB III (40 cm / 1.3 ft.; sold
separately) or IFC-150AB III (1.5 m /
4.9 ft.; sold separately).
Attach the cable protector to the
camera and run the cable through the
clamp.
For cable protector instructions, refer
to the camera instruction manual.
4
Turn on both the transmitter and
camera.
The transmitter’s <3> lamp will
light and <D> will be displayed on
the transmitter’s LCD panel.
Attaching to the Camera
GPS
WFT
CAMERA
Comentarios a estos manuales