Canon EOS 60D Manual de usuario

INSTRUCTION MANUALThe lenses and accessories mentioned in this Instruction Manual are current as of August 2010. For information on the camera’s compa

10PowerBattery• Charging  p.24• Battery check  p.29• Battery information check p.268Power outlet  p.272Auto power off  p.50LensAttaching/Deta

100u White Balance CorrectionNWith just one shot, three images having a different color balance can be recorded simultaneously. Based on the color tem

101If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. The default setting is [Standard].

102Due to the lens characteristics, the four corners of the picture might look darker. This is called lens light fall-off or drop in peripheral illumi

1033 Lens Peripheral Illumination CorrectionThe camera already contains lens peripheral illumination correction data for about 25 lenses. In step 2, i

104You can freely create and select the folder where the captured images are to be saved.This is optional since a folder will be created automatically

1053 Creating and Selecting a Folder With the folder selection screen displayed, select a folder and press <0>. The folder where the captured

106The file number is like the frame number on a roll of film. The captured images are assigned a sequential file number from 0001 to 9999 and saved i

1073 File Numbering MethodsThe file numbering restarts from 0001 each time the card is replaced or a new folder is created.Whenever the card is replac

108When you set the copyright information, it will be appended to the image as Exif information.1Select [Copyright information]. Under the [7] tab, s

1093 Setting Copyright InformationN Changing the entry areaPress the <Q> button to toggle between the top and bottom entry areas. Moving the c

11Index to FeaturesSelf-timer  p.82Remote control  p.126Exposure AdjustmentsExposure compensation  p.120AEB  p.121AE lock  p.122FlashBuilt-

110The color space refers to the range of reproducible colors. With this camera, you can set the color space for captured images to sRGB or Adobe RGB.

1115Advanced OperationsIn Creative Zone modes, you can set the shutter speed and/or aperture to set the exposure as desired. By changing the camera se

112The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE.*<d> stands for Prog

113d: Program AE If the “30"” shutter speed and the maximum aperture blink, it indicates underexposure.Increase the ISO speed or use flash. If

114In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the standard exposure suiting the brightness of th

115s: Shutter-Priority AE If the maximum aperture blinks, it indicates underexposure.Turn the <6> dial to set a slower shutter speed until the

116In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposure suiting the subject

117f: Aperture-Priority AEPress the depth-of-field preview button to stop down the lens to the current aperture setting. You can check the depth of fi

118In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewf

119You can select one of four methods to measure the subject brightness. In Basic Zone modes, evaluative metering is set automatically.1Press the <

12Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used

120Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera.Although you can set

121By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±3 stops in 1/3-stop increments for three successiv

122Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure

123When bulb is set, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button.

124F: Bulb ExposuresIf you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this,

125Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations (mirror shock) can also h

126With Remote Controller RC-6 (sold separately), you can shoot remotely up to approx. 5 meters/16.4 feet from the camera. You can either shoot immedi

127To help level the camera, the electronic level can be displayed on the LCD monitor, in the viewfinder, and on the LCD panel. Note that only the hor

128Q Displaying the Electronic LevelThe electronic level display in the viewfinder and on the LCD panel uses the exposure level scale. Note that the e

1296Flash PhotographyWith the built-in flash, you can shoot with autoflash, manual flash, and wireless flash.In Creative Zone modes, just press the &l

13Handling PrecautionsLCD Panel and LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effecti

130In Basic Zone modes and Creative Zone modes, the shutter speed and aperture for flash photography will be set as shown below. By default, E-TTL II

131D Using the Built-in FlashEffective Range of Built-in Flash [Approx. meters/feet]Using the red-eye reduction lamp before taking a flash picture can

132D Using the Built-in FlashSet flash exposure compensation if the flash exposure of the subject does not come out as desired. You can set flash expo

133D Using the Built-in Flash If the [2 Auto Lighting Optimizer] (p.101) is not set to [Disable], the image may still look bright even if a darker fl

134D Using the Built-in FlashFE (flash exposure) lock obtains and locks the standard flash exposure reading for any part of a subject.1Press the <D

135The built-in flash and external Speedlite settings can be set with the camera’s menu. You can use those menu options for the external Speedlite onl

1363 Setting the FlashN[Built-in flash func. setting] and [External flash func. setting] Settable Functions* For [FEB] (Flash exposure bracketing) and

1373 Setting the FlashN Shutter sync.Normally, set this to [1st curtain] so that the flash fires immediately after the exposure starts.If [2nd curtai

1383 Setting the FlashN1Display the Custom Function. With the camera ready to shoot with an external Speedlite, select [External flash C.Fn setting],

139The camera’s built-in flash can work as a master unit with Canon Speedlites having a wireless slave feature and wirelessly trigger the Speedlite to

14Quick Start Guide1Insert the battery. (p.26)To charge the battery, see page 24.2Attach the lens. (p.34)Align the lens’ white or red index with the c

140Using Wireless FlashNThis shows the most basic setup for fully-automatic wireless flash with one Speedlite.Steps 1 to 3 and 6 to 7 apply to all wir

141Using Wireless FlashN5Select [Wireless func.]. For [Wireless func.], select [0], then press <0>. Under [Wireless func.], [Channel], etc., w

142Using Wireless FlashNThis shows fully-automatic wireless flash shooting with one external Speedlite and the built-in flash.You can change the flash

143Using Wireless FlashNMultiple Speedlite slave units can be treated as one flash unit or separated into slave groups whose flash ratio can be set.Th

144Using Wireless FlashN[1 (A:B)] Multiple slave units in multiple groupsDivide the slave units into groups A and B, and change the flash ratio to obt

145Using Wireless FlashNThe built-in flash can also be added to wireless flash shooting explained on pages 143-144.The basic settings are shown below.

146Using Wireless FlashNFlash exposure compensationWhen [Flash mode] is set to [E-TTL II], flash exposure compensation can be set. The flash exposure

147Using Wireless FlashNWhen [Flash mode] is set to [Manual flash], the flash output can be set manually. The flash output settings ([1 flash output],

148Basically operates like a built-in flash for easy operation.When an EX-series Speedlite (sold separately) is attached to the camera, almost all the

149External SpeedlitesSync SpeedThe camera can synchronize with non-Canon compact flash units at 1/250 sec. and slower speeds. With large studio flash

15Quick Start Guide6Flip out the LCD monitor. (p.27)7Focus the subject. (p.40)Look through the viewfinder and aim the viewfinder center over the subje

150

1517Shooting with the LCD Monitor (Live View Shooting)You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View sho

1521Display the Live View image. Press the <A> button. The image will appear on the LCD monitor.The image’s field of view is approx. 100%.2Fo

153A Shooting with the LCD MonitorSet the [z Live View shoot.] menu to [Enable].Battery Life with Live View Shooting [Approx. number of shots] The fi

154A Shooting with the LCD Monitor Each time you press the <B> button, the information display will change.About the Information DisplayMagnify

155A Shooting with the LCD MonitorThe final image simulation reflects the effects of the Picture Style, white balance, etc., in the Live View image so

156During Live View shooting, you can press the <f>, <R>, or <i> button to display the respective setting screen on the LCD monitor,

157Function settings particular to Live View shooting are explained here. The menu options under the [z] tab are explained below.The functions settabl

158z Menu Function Settings Exposure simulationNExposure simulation displays and simulates how the brightness of the actual image (exposure) will loo

159z Menu Function Settings Silent shootingN•Mode 1The shooting operation noise is quieter than with normal shooting. Continuous shooting is also po

16For detailed information, reference page numbers are provided in parentheses (p.**).NomenclatureSpeaker (p.204)Body cap (p.34)Remote control termina

160The AF modes available are [Live mode], [u Live mode] (face detection, p.161), and [Quick mode] (p.165).If you want to achieve precise focus, set t

161Using AF to Focus3Focus the subject. Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point

162Using AF to Focus2Focus the subject. Press the shutter button halfway and the camera will focus the face covered by the <p> frame. When foc

163Using AF to FocusAF operation Focusing will take slightly longer. Even when focus has been achieved, pressing the shutter button halfway will foc

164Using AF to FocusShooting conditions which can make focusing difficult: Low-contrast subjects such as the blue sky and solid-color, flat surfaces.

165Using AF to FocusThe dedicated AF sensor is used to focus in the One-Shot AF mode (p.76), using the same AF method as with viewfinder shooting.Alth

166Using AF to Focus3Focus the subject. Aim the AF point over the subject and press the shutter button halfway. The Live View image will turn off, t

167You can magnify the image and focus precisely manually.1Set the lens focus mode switch to <MF>. Turn the lens focusing ring to focus roughly

168Notes About the Live View Image Under low- or bright-light conditions, the Live View image might not reflect the brightness of the captured image.

169Notes About the Shooting Results When you shoot continuously with the Live View function for a long period, the camera’s internal temperature may

17Nomenclature<A> Live View shooting/Movie shooting button (p.152/172)<V> Focal plane mark<M> Menu button (p.46)Viewfinder eyepieceE

170

1718Shooting MoviesSet the Mode Dial to <k> to shoot movies. The movie recording format will be MOV.Cards which can record moviesWhen shooting m

172Connecting the camera to a TV set is recommended to playback movies (p.209, 212).1Set the Mode Dial to <k>. The reflex mirror will make a so

173k Shooting Movies During movie shooting, do not point the lens toward the sun. The sun’s heat can damage the camera’s internal components. Cautio

174k Shooting MoviesYou can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for a

175k Shooting Movies5 Set the ISO speed. Press the <i> button. The ISO speed setting screen will appear on the LCD monitor. Press the <U&g

176k Shooting MoviesEach time you press the <B> button, the information display will change.About the Information DisplayMovie shooting remaini

177k Shooting MoviesThe final image simulation reflects the effects of the Picture Style, white balance, etc., in the Live View image so you can see w

178k Shooting MoviesWhile shooting a movie, you can also take a still photo by pressing the shutter button completely.Shooting Stills in the <k>

179You can press the <f> or <R> button to display the respective setting screen on the LCD monitor, and press the <U> key to set the

18NomenclatureLCD PanelThe display will show only the settings currently applied.Shutter speedBusy (buSY)Built-in flash recycling (buSY)<A> High

180Under the [o] tab, the [Movie rec. size] menu enables you to select the movie’s image size [****x****] and frame rate [9] (frames recorded per seco

1813 Setting the Movie-recording SizeTotal Movie Recording Time and File Size Per MinuteDue to file system limitations, if the file size of a single m

182The menu options under the [n], [o], and [Z] tabs are explained below. Note that the settings under the [n], [o], and [Z] menu tabs will take effec

1833 Menu Function Settings AF and metering buttons for kYou can change the function assigned to the halfway pressing of the shutter button, the AF s

1843 Menu Function Settings[o] Menu Sound recordingNNormally, the built-in microphone will record monaural sound. Stereo sound recording is possible

1853 Menu Function Settings[Wind filter]If [Enable] is set, outdoor wind noise entering the microphone will be reduced. Note that, some low-tone noise

1863 Menu Function Settings[Z] Menu Exposure compensationAlthough exposure compensation can be set up to ±5 stops, exposure compensation for movies c

187Notes on Movie ShootingRecording and Image Quality If the attached lens has an Image Stabilizer, the Image Stabilizer will operate at all times ev

188Notes on Movie ShootingPlayback and TV connection If the brightness changes during autoexposure movie shooting, that part might look momentarily s

189 9Image PlaybackThis chapter explains how to playback and erase photos and movies, how to display images on a TV screen, and other playback-related

19NomenclatureViewfinder InformationThe display will show only the settings currently applied.Spot metering circleAF points (Superimposed display)<

1901Playback the image. Press the <x> button. The last captured image or last image viewed will appear.2Select the image.To playback images s

191* When you shoot in RAW+JPEG image quality, the RAW image file size will be displayed.* For still photos taken during movie shooting, <G> wil

192B Shooting Information Display* For images taken in Basic Zone modes, the information displayed may differ depending on the shooting mode. About t

193B Shooting Information Display About the AF Point DisplayWhen the [4 AF point disp.] menu option is set to [Enable], the AF point which achieved f

194Search for images quickly with the index display showing four or nine images on one screen.1Switch to the index display. During image playback, pr

195x Searching for Images QuicklyWith the single image display, you can turn the <6> dial to jump through the images.1Select the jump method. I

196You can magnify a shot image by 1.5x to 10x on the LCD monitor.1Magnify the image. During image playback, press the <u> button. The image w

197You can rotate the displayed image to the desired orientation.1Select [Rotate]. Under the [3] tab, select [Rotate], then press <0>.2Select t

198With the [4 Rating] menu, you can give one of five ratings (l, m, n, o, p) to images and movies.1Select [Rating]. Select the [4 Rating] menu, then

1993 Setting RatingsThe number of images and movies for each rating will be counted up to 3 digits (999). If rated images reaches 1000 or higher, [###

2The EOS 60D is a high-performance, digital single-lens reflex camera featuring a fine-detail CMOS sensor with approx. 18.0 effective megapixels, DIGI

20NomenclatureMode DialTurn the Mode Dial while holding down the Mode Dial lock-release button at the center.Basic ZoneAll you do is press the shutter

200When you press the <Q> button during playback, you can set the following: [3 Protect Images, 3 Rotate, 4 Rating, 3 Creative filters, 3 Resize

201Q Quick Control During PlaybackTo rotate an image, set the [5 Auto rotate] menu to [OnzD]. If it is set to any other setting, the image will not ro

202Basically, you can playback movies in the following three ways:Use the provided AV cable or an HDMI Cable HTC-100 (sold separately) to connect the

203k Enjoying MoviesYou can playback movies on the camera’s LCD monitor and even edit out the first and last scenes. You can also playback the photos

2041Playback the image. Press the <x> button to display the images.2Select a movie. Turn the <5> dial to select the movie to be played.

205k Playing MoviesFunction Playback Description2 Exit Returns to the single-image display.7 Play Pressing <0> toggles between play and stop.8 S

206You can edit out the first and last scenes of a movie in 1-sec. increments.1On the movie playback screen, select [X]. The editing screen will be d

207You can playback the images in the card as an automatic slide show.1Select [Slide show]. Under the [4] tab, select [Slide show], then press <0&

2083 Slide Show (Auto Playback)3Set [Set up] as desired. Press the <V> key to select [Set up], then press <0>.Set the [Display time] (st

209You can also view the still photos and movies on a TV set. Before connecting or disconnecting the cable between the camera and television, turn off

21NomenclatureLensLens with a distance scaleLens without a distance scaleFocus mode switch (p.34)Lens mount index (p.34)Contacts (p.13)Hood mount (p.3

210Viewing the Images on TV5Press the <x> button. The image will appear on the TV screen. (Nothing will be displayed on the camera’s LCD monito

211Viewing the Images on TVFor HDMI CEC TV setsWhen a TV set compatible with HDMI CEC* is connected to the camera with the HDMI cable, you can use the

212Viewing the Images on TV1Connect the provided AV cable to the camera. With the plug’s <Canon> logo facing the front of the camera, insert it

213Protecting an image prevents it from being erased accidentally.1Select [Protect images]. Under the [3] tab, select [Protect images], then press &l

214K Protecting ImagesYou can protect all the images in a folder or card at one time.When the [3 Protect images] menu option is set to [All images in

215You can either select and erase images one by one or erase them in one batch. Protected images (p.213) will not be erased.Once an image is erased,

216L Erasing Images2Select [Select and erase images]. Select [Select and erase images], then press <0>. The images will be displayed. To disp

217You can adjust the brightness of the LCD monitor to make it easier to read.1Select [LCD brightness]. Under the [6] tab, select [LCD brightness], t

218Changing Image Playback SettingsVertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and computer

21910Post-ProcessingImagesAfter shooting images, you can apply Creative filters or resize the image (downsize the pixel count). You can also process R

22NomenclatureBattery Charger LC-E6Charger for Battery Pack LP-E6 (p.24).Battery Charger LC-E6ECharger for Battery Pack LP-E6 (p.24).Battery pack slot

220You can apply the following Creative filters to an image and save it as a new image: Grainy B/W, Soft focus, Toy camera effect, and Miniature effec

221Creative Filters5Save the image. Select [OK] to save the image. Note the destination folder and image file number, then select [OK]. To apply a

222You can resize an image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3/4/a/b images. JPEG

223S ResizeResize Options According to Original Image SizeThe [8.0M 3456x2304] image size displayed in step 3 has a 3:2 aspect ratio. The image size a

224You can process 1 images with the camera and save them as JPEG images. While the RAW image itself does not change, you can process the RAW image ac

225R Processing RAW Images with the CameraNDisplaying the setting screen Press <0> to display the setting screen. Turn the <6> or <5&g

226R Processing RAW Images with the CameraN BrightnessYou can adjust the image brightness up to ±1 stop in 1/3-stop increments. The displayed image

227R Processing RAW Images with the CameraN Color space (p.110)You can select either sRGB or Adobe RGB. Since the camera’s LCD monitor is not compat

228R Processing RAW Images with the CameraN Chromatic aberration correctionWhen [Enable] is set, lateral chromatic aberration caused by the lens is

22911Sensor CleaningThe camera has a Self Cleaning Sensor Unit attached to the image sensor’s front layer (low-pass filter) to shake off dust automati

231Getting StartedThis chapter explains preparatory steps before you start shooting and basic camera operations.Attaching the StrapPass the end of the

230Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the fron

231Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However, in case visible dust sti

2323 Appending Dust Delete DataN3Photograph a solid-white object. At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patt

233Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc.The surface of the image sensor is extr

2343 Manual Sensor CleaningN While cleaning the sensor, never do any of the following. Doing any of the following will cut off the power and close th

23512Printing Images Printing (p.236)You can connect the camera directly to a printer and print out the images in the card. The camera is compatible

236The direct printing procedure is done entirely with the camera while you look at the LCD monitor.1Set the camera’s power switch to <2>.2Set u

237Preparing to Print6Playback the image. Press the <x> button. The image will appear, and the <w> icon will appear on the upper left to

238The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer’s i

239wPrinting Select the size of the paper loaded in the printer, then press <0>. The paper type screen will appear. Select the type of the pa

241Remove the protective cover.2Attach the battery. As shown in the illustration, attach the battery securely to the charger. To detach the battery,

240wPrinting4Set the printing effects. Set as necessary. If you need not set any printing effects, go to step 5. What is displayed on the screen dif

241wPrinting5Set the date and file number imprinting. Set as necessary. Select <I>, then press <0>. Set as desired, then press <0>

242wPrintingIn step 4 on page 240, select the printing effect. When the <e> icon is displayed brightly next to <z>, press the <B> bu

243wPrintingYou can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you se

244wPrinting Depending on the printer, the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the gr

245You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot

246W Digital Print Order Format (DPOF)4 Exit the setting. Press the <7> button. The print order screen will reappear. Next, select [Sel.Image

247W Digital Print Order Format (DPOF) Sel.ImageSelect and order images one by one.To display the three-image display, press the <I> button. To

248With a PictBridge printer, you can easily print images with DPOF.1 Prepare to print. See page 236. Follow the “Connecting the Camera to a Printer”

24913Customizing theCameraWith Custom Functions, you can change the camera functions to suit your preferences. Also, the current camera settings can b

25Charging the BatteryRecharge the battery on the day before or on the day it is to be used.Even during storage, a charged battery will gradually dra

2501Select [8].2Select the group. Select a Custom Function group (I to IV), then press <0>.3Select the Custom Function No. Press the <U>

2513 Custom FunctionsNC.Fn I: ExposureA LV shooting1 Exposure level incrementsp.252k2 ISO speed setting increments k3 ISO expansion k4 Bracketing auto

2523 Custom Function SettingsNC.Fn I: ExposureC.Fn I -1 Exposure level increments0: 1/3-stop1: 1/2-stopSets 1/2-stop increments for the shutter sp

2533 Custom Function SettingsNC.Fn I -5 Bracketing sequenceThe AEB shooting sequence and white balance bracketing sequence can be changed.0: 0, -,

2543 Custom Function SettingsNC.Fn II: ImageC.Fn II -1 Long exposure noise reduction0: Off1: AutoFor 1 sec. or longer exposures, noise reduction i

2553 Custom Function SettingsNC.Fn II -3 Highlight tone priority0: Disable1: EnableImproves the highlight detail. The dynamic range is expanded fr

2563 Custom Function SettingsNC.Fn III -3 Superimposed display0: On1: OffWhen focus is achieved, the AF point will not light up in red in the viewf

2573 Custom Function SettingsNCustomizing camera controls with the Quick Control screen (p.45)The Custom Controls function on the Quick Control screen

2583 Custom Function SettingsNC.Fn IV -2 Assign SET buttonYou can assign a frequently-used function to <0>. Press <0> when the camera

2593 Custom Function SettingsNC.Fn IV -4 Focusing ScreenIf you change the focusing screen, change this setting to match the focusing screen type.

26Load a fully-charged Battery Pack LP-E6 into the camera.1Open the battery compartment cover. Slide the lever as shown by the arrow and open the cov

2603 Custom Function SettingsNC.Fn IV -5 Add image verification data0: Disable1: EnableData for verifying whether the image is original or not is

261Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently.1Select [My Menu settings]

262Under the Mode Dial’s <w> position, you can register most of the current camera settings including your preferred shooting mode, menus, Custo

263w: Register Camera User SettingsN[1] Quality, Beep, Release shutter without card, Image review, Peripheral illumination correction, Red-eye reducti

264

26514ReferenceThis chapter provides reference information for camera features, system accessories, etc.

266When you press the <B> button while the camera is ready to shoot, you can display [Displays camera settings], [Displays shooting functions] (

267B Button Functions* If flash exposure compensation is set with an external Speedlite, the flash exposure compensation icon will change from y to C.

268You can check the battery’s condition on the LCD monitor. Each Battery Pack LP-E6 has a unique serial No., and you can register multiple battery pa

2693 Checking the Battery InformationYou can register up to six Battery Packs LP-E6 to the camera. To register multiple battery packs to the camera, d

27After you flip out the LCD monitor, you can set menu functions, use Live View shooting, shoot movies, and playback images and movies. You can change

2703 Checking the Battery InformationAffixing a serial No. label onto all the registered Battery Pack LP-E6’s makes it convenient.1Write the serial No

2713 Checking the Battery InformationYou can check the remaining capacity of any battery pack (even while not installed) and also when it was last use

272With the AC Adapter Kit ACK-E6 (sold separately), you can connect the camera to a household power outlet and not worry about the remaining battery

273With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a personal computer or upload them to a

274Using Eye-Fi Cards4Display the connection information. Select [Connection info.], then press <0>.5Check the [Access point SSID:]. Check tha

275Using Eye-Fi CardsCautions for Using Eye-Fi Cards If “ ” is displayed, an error occurred while retrieving the card information. Turn the camera of

276o: Set automatically k: User selectable : Not selectable* For manual exposure only. The z icon indicates still photo shooting in the movie sho

277Function Availability Table According to Shooting Modes* Multiple aspect ratios are available only with Live View shooting. o o o o o k o

2781 Shooting 1 (Red) Page2 Shooting 2 (Red)y Shooting 3 (Red) Menu SettingsQuality73 / 83 / 74 / 84 / 7a / 8a / b / c841 / 41 / 61BeepEnable / Disabl

279Menu Settingsz Shooting 4 (Red) Page3 Playback 1 (Blue)4 Playback 2 (Blue)Live View shooting Enable / Disable 157AF modeLive mode / u Live mode / Q

28If you turn on the power switch and the date/time setting screen appears, see page 30 to set the date/time.<1> : The camera turns on.<2>

280Menu Settings5 Set-up 1 (Yellow) Page* Displayed only when an Eye-Fi card is used.6 Set-up 2 (Yellow)7 Set-up 3 (Yellow)Auto power off1min. / 2 min

281Menu Settings8 Custom Functions (Orange) Page9 My Menu (Green)n Movie 1 (Red)C.Fn I : ExposureCustomize camera functions as desired252C.Fn II : Ima

282Menu Settingso Movie 2 (Red) PageZ Movie 3 (Red)Movie recording size1920x1080 (6 / 5 / 4) / 1280x720 (8 / 7) / 640x480 (8 / 7) / Crop 640x480 (8 /

283If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact

284Troubleshooting Guide If the power is turned off while an image is being recorded to the card, the access lamp will still continue to light/blink

285Troubleshooting Guide If a card error message is displayed, see page 33 or 291. Set the lens focus mode switch to <AF> (p.34). To prevent

286Troubleshooting Guide If you shoot at night when the background is dark, the shutter speed becomes slow automatically (slow-sync shooting) so that

287Troubleshooting Guide If you use flash, the shutter will make two sounds each time you shoot (p.153). On the Quick Control screen, check the [Cus

288Troubleshooting Guide If you operate the camera’s dials or lens during movie shooting, the operation noise will also be recorded. Use an external

289Troubleshooting Guide Set the color space to sRGB. If Adobe RGB is set, the first character will be an underscore (p.110). If you use a card whic

29Turning on the PowerWhen the power switch is set to <1>, the battery level will be indicated in one of six levels: A blinking battery icon (b)

290Troubleshooting Guide [###] will be displayed when the number of images/movies exceeds the number of digits that can be displayed. [Eye-Fi settin

291If there is a problem with the camera, an error message will appear. Follow the on-screen instructions.* If the error still persists, write down th

292System MapCar Battery Charger CBC-E6Rubber Frame Eb Eyepiece Extender EP-EX15E-series Dioptric Adjustment LensesEyecup Eb Angle Finder C Focusing S

293System Map* The length of all cables is approx. **m/**ft.EF-S lenses EF lenses Remote SwitchRS-60E3Remote Controller RC-6External microphone HDMI C

294•TypeType: Digital, single-lens reflex, AF/AE camera with built-in flashRecording media: SD memory card, SDHC memory card, SDXC memory cardImage se

295SpecificationsAutomatic image brightness correction: Auto Lighting OptimizerHighlight tone priority: ProvidedLens peripheral illumination correctio

296SpecificationsExposure compensation:Manual:±5 stops in 1/3- or 1/2-stop incrementsAEB: ±3 stops in 1/3- or 1/2-stop increments (Can be combined wit

297Specifications• Live View ShootingAspect ratio settings: 3:2, 4:3, 16:9, 1:1Focusing:Live mode, Face detection Live mode (Contrast detection)Quick

298SpecificationsSound recording: Built-in monaural microphoneExternal stereo microphone terminal providedSound recording level adjustable, wind filte

299Specifications• Custom FunctionsCustom Functions: 20Camera user settings: Register under Mode Dial’s CMy Menu registration: PossibleCopyright infor

3Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer.* Battery Charge

30When you turn on the power for the first time or if the date/time has been reset, the Date/Time setting screen will appear. Follow steps 3 and 4 to

300Specifications•Battery Pack LP-E6Type: Rechargeable lithium-ion batteryRated voltage: 7.2 V DCBattery capacity: 1800 mAhDimensions (W x H x D):Appr

301Specifications• EF-S 18-55mm f/3.5-5.6 ISAngle of view: Diagonal extent: 74°20’ - 27°50’Horizontal extent: 64°30’ - 23°20’Vertical extent: 45°30’ -

302Specifications• EF-S 18-135mm f/3.5-5.6 ISAngle of view: Diagonal extent: 74°20’ - 11°30’Horizontal extent: 64°30’ - 9°30’Vertical extent: 45°30’ -

303Specifications• EF-S 17-85mm f/4-5.6 IS USMAngle of view: Diagonal extent: 78°30’ - 18°25’Horizontal extent: 68°40’ - 15°25’Vertical extent: 48°00’

304About MPEG-4 Licensing“This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video

305Safety WarningsFollow these safeguards and use the equipment properly to prevent injury, death, and material damage.Preventing Serious Injury or De

306• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of elec

307With the lenses listed below, the six AF points on the right and left will be horizontal-line sensitive and the upper and lower two AF points will

308IMPORTANT SAFETY INSTRUCTIONS1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for Battery Charger LC-E

309Software Start Guide andInstruction Manual IndexEOS Solution Disk ...310Installing the Software .

311Display the menu. Press the <M> button to display the menu.2Under the [6] tab, select [LanguageK]. Press the <U> key on the <9>

310310EOS Solution DiskThis disk contains various software for EOS cameras.Communication Software for the Camera and Computer You can download images

311311Software Start GuideCompatible OS1Check that the camera is not connected to your computer.2 Insert the EOS Solution Disk (CD).3 Click [Easy Inst

312Software Start Guide312Compatible OS1Check that the camera is not connected to your computer.2 Insert the EOS Solution Disk (CD). On your computer

313313[WINDOWS]EOS Software Instruction Manuals DiskCopy the PDF Instruction Manuals contained on the disk to your computer.1Insert the EOS Software I

31410-sec. or 2-sec. delay ...821280x720...1801920x1080...1801st-c

315IndexCreative filters ...220M icon...4Crop 640x480 ...

316IndexFull Auto...54Full HD...171Full High-Definition ...180, 202,

317IndexLive View shooting ...57, 151Exposure simulation ...158Face detection Live mode (AF) ...161

318IndexPeripheral illumination correction..102Personal white balance...98PictBridge ... 235Picture

319IndexShooting settings display ...43, 267Shutter button ...40Shutter sync. ...137S

32The camera is compatible with SD, SDHC, and SDXC memory cards. The captured images are recorded onto the card (sold separately).Make sure the card’s

INSTRUCTION MANUALThe lenses and accessories mentioned in this Instruction Manual are current as of August 2010. For information on the camera’s compa

33Installing and Removing the SD Card1Open the cover. Set the power switch to <2>. Check that “Recording...” is not displayed on the LCD monit

341Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.2Attach the lens. Align the lens’ red or white

35Attaching and Detaching a LensTo zoom, turn the zoom ring on the lens with your fingers.If you want to zoom, do it before focusing. Turning the zoom

36Attaching and Detaching a LensTo owners of the EF-S 18-200mm f/3.5-5.6 IS lens:You can prevent the lens from extending out while you are carrying it

37When a lens hood is attached to the lens, it can reduce image ghosting or flare by blocking stray light. The lens hood can also protect the front of

38When you use the IS lens’ built-in Image Stabilizer, camera shake is corrected to obtain a less blurred shot. The procedure explained here is based

39Turn the dioptric adjustment knob. Turn the knob left or right until the nine AF points in the viewfinder look sharp.To obtain sharp images, hold t

4Icons in this Manual<6> : Indicates the Main Dial.<5> : Indicates the Quick Control Dial.<9> <V> <U> : Indicates the Mu

40Basic OperationThe shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely.

41Basic OperationTurn the Mode Dial while holding down the Mode Dial lock-release button at the center.(1) After pressing a button, turn the <6>

42Basic Operation(1) After pressing a button, turn the <5> dial.When you press a button such as <f>, <R>, or <i>, the respecti

43Basic Operation Use it to select the AF point, correct the white balance, move the AF frame or the magnifying frame during Live View shooting, or s

44You can directly select and set the shooting functions displayed on the LCD monitor. This is called the Quick Control screen.1Display the Quick Cont

45Q Using the Quick Control Screen On the Quick Control screen, select the function and press <0>. The function’s setting screen will then appe

46With menus, you can set various functions such as the image-recording quality, date/time, etc. While looking at the LCD monitor, press the <M>

473 Menu Operations1Display the menu screen. Press the <M> button to display the menu screen.2Select a tab. Press the <U> key to select

48If the card is new or was previously formatted by another camera or computer, format the card with the camera.When the card is formatted, all images

49Before You Start The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card-relat

5For first-time DSLR users, Chapters 1 and 2 explain the camera’s basic operations and shooting procedures.ChaptersIntroduction2Getting Started23Basic

50Before You StartYou can change the auto power-off time for the camera to turn off automatically after a certain period of non-operation. If you do n

51Before You StartThe camera’s shooting settings and menu settings can be reverted to the default.1Select [Clear all camera settings]. Under the [7]

52Before You StartCamera Settings Live View Shooting SettingsAuto power off 1 min.Live View shootingEnableBeep EnableRelease shutter without cardEnabl

532Basic ShootingThis chapter explains how to use the Basic Zone modes on the Mode Dial for best results.With Basic Zone modes, all you do is point an

541Set the Mode Dial to <1>.2Aim any AF point over the subject. All the AF points will be used to focus, and generally the closest object will

551 Fully Automatic ShootingThe focus confirmation light <o> blinks and focus is not achieved.Aim the AF point over an area having good contras

56Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective.In the <1> (Full Au

571 Full Auto TechniquesBy pressing the <A> button, you can shoot while viewing the image on the camera’s LCD monitor. This is called Live View

58In places where flash photography is prohibited, use the <7> (Flash Off) mode. This mode is also effective for capturing the particular ambien

59Unlike the <1> Full Auto mode where the camera sets everything, the <C> Creative Auto mode enables you to easily set the depth of field,

612Introduction 2Item Check List... 3Conventions Used i

C Creative Auto Shooting60(1) Shoot by ambience selectionYou can set the ambience you want to convey in your images. Press the <U> key to select

61C Creative Auto Shooting(3) Drive mode/Flash firingWhen you press <0>, the drive mode and flash firing setting screens will appear. Set as des

62The <2> (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and the hair look softer than with

63Use the <3> (Landscape) mode for wide scenery, night scenes, or to have everything in focus from near to far. The greens and blues also become

64When you want to photograph flowers or small things up close, use the <4> (Close-up) mode. To make small things appear much larger, use a macr

65To photograph a moving subject, whether it is a child running or a moving vehicle, use the <5> (Sports) mode. Use a telephoto lens.Using a te

66To shoot someone at night and obtain a natural-looking exposure in the background, use the <6> (Night Portrait) mode. Use a wide-angle lens a

67In Basic Zone modes, you can press the <Q> button to display the Quick Control screen. The table below indicates the functions that can be set

68Except in the <1> (Full Auto) and <7> (Flash Off) Basic Zone modes, you can select the ambience for shooting.1Set the Mode Dial to any o

69Shoot by Ambience Selection4Set the ambience effect. Press the <V> key to select the effect bar so that [Effect] appears on the bottom. Pres

7Contents354Shoot by Lighting or Scene Type ...71Setting the AF and Drive Modes 75f:

Shoot by Ambience Selection70Ambience Settings(1) Standard settingStandard image characteristics for the respective shooting mode. Note that <2>

71In the <2> (Portrait), <3> (Landscape), <4> (Close-up), and <5> (Sports) Basic Zone modes, you can shoot while the settings

Shoot by Lighting or Scene Type723On the Quick Control screen, select the lighting or scene type. Press the <Q> button (7). Press the <V>

73Shoot by Lighting or Scene TypeLighting or Scene Type Settings(1) Default settingThe default setting.(2) DaylightFor subjects under sunlight. Produc

74

753Setting the AF andDrive ModesThe viewfinder has nine AF points. By manually selecting a suitable AF point, you can shoot with autofocus while compo

76You can select the AF mode suiting the shooting conditions or subject. In Basic Zone modes, the most suitable AF mode is set automatically.1On the l

77f: Selecting the AF ModeNThis AF mode is for moving subjects when the focusing distance keeps changing. While you hold down the shutter button halfw

78Select one of the nine AF points to autofocus. Note that in Basic Zone modes, you cannot select the AF point since it is selected automatically.1Pre

79S Selecting the AF Point NUnder low-light conditions, when you press the shutter button halfway, the built-in flash fires a brief burst of flashes.

8Contents109678Flash Photography 129D Using the Built-in Flash... 130Settin

80Autofocus can fail to achieve focus (the focus confirmation light <o> blinks) with certain subjects such as the following:Subjects difficult t

81Single and continuous drive modes are provided. In the <1> (Full Auto) mode, single shooting is set automatically.1Press the <R> button.

82Use the self-timer when you want to be in the picture. The <Q> (10 sec. timer) can be used in all shooting modes.1Press the <R> button.

834Image SettingsThis chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Style, white balance, Auto Lightin

84You can select the pixel count and the image quality. There are eight JPEG image quality settings: 73/83/74/84/7a/8a/b/c. There are three RAW image

853 Setting the Image-recording QualityGuide to Image-recording Quality Settings (Approx.)*1: b is suitable for playing the images on a digital photo

863 Setting the Image-recording QualityA RAW image is raw data output by the image sensor converted to digital data. It is recorded to the card as is,

873 Setting the Image-recording QualityThe maximum burst during continuous shooting indicated on page 85 is the number of continuous shots that can be

88Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, the ISO speed is set automatically (p.

89i: Setting the ISO SpeedNIf the ISO speed is set to “A”, the actual ISO speed to be set will be displayed when you press the shutter button halfway.

9Contents14131112S Resize ...222R Processing RAW Im

90By selecting a Picture Style, you can obtain image effects matching your photographic expression or the subject.In Basic Zone modes, you cannot sele

91A Selecting a Picture StyleNS NeutralThis Picture Style is for users who prefer to process images with their computer. For natural colors and subdue

92You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots.

93A Customizing a Picture StyleNFor Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explain

94You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User D

95A Registering a Picture StyleN5Select a parameter. Select a parameter such as [Sharpness], then press <0>.6Set the parameter. Press the <

96White balance (WB) is for making the white areas look white. Normally, the <Q> (Auto) setting will obtain the correct white balance. If natura

973 Setting the White BalanceNCustom white balance enables you to manually set the white balance for a specific light source for better accuracy. Do t

983 Setting the White BalanceNYou can set the white balance’s color temperature numerically in Kelvin. This is for advanced users.1Select [White bala

99You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature c